Hitachi CP-X268A user manual Remote Freq, Use the / button to change the Projectors remote sensor

Page 45

OPTION Menu

OPTION Menu (continued)

Item		Description
	REMOTE FREQ.
	Use the ▲/▼ button to change the Projector's remote sensor
	setting (18).
	1:NORMAL ó 2:HIGH
	Items with a checkmark are on. The factory default setting is for
	both 1:NORMAL and 2:HIGH to be on. If the remote control does
	not function correctly set the this to either only 1 or only 2 as
	described in Remote Control Settings (18).
	Neither can be turned off at the same time.
	INFORMATION
	Selecting this item displays a dialog titled “INPUT INFORMATION”.
	It shows the information about the current input.
	INPUT-INFORMATION	INPUT-INFORMATION	INPUT-INFORMATION
SERVICE	RGB	S-VIDEO	COMPONENT
SERVICE	04x768 @60Hz	SECAM	576i @50
	FRAME LOCK	AUTO	SCART RGB

•The “FRAME LOCK” message on the dialog means the frame lock function is working.

•The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in INPUT menu. (35)

•This item can't be selected for no signal and sync out.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not reset.

RESET ï CANCEL

45

Image 45

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content How to use the Slot cover lock Contents of packageProjector features PreparationsFastening the lens cover Bottom side Part namesComponent CB/PBCR/PR Remote control Control buttonsMagnify Setting up Min Max Down ArrangementElevator feet Adjusting the projectors elevatorUsing the Security Bar How to attachSecurity Bar Anti-theft chain or wire sold separately About Plug-and-Play capability Connecting your devicesConnecting to a Network and USB Memory Examples of connection with a computerUSB CR/PR CB/PBAC inlet Connector Power cord Connecting power supplyInserting an SD Card and USB Memory Putting batteries Remote controlChanging the signal setting for the projectors remote sensor Using the remote controlTurning on the power Power on/offTurning off the power STANDBY/ONSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signalSelecting an input signal  For a no signalAdjusting the position Using the automatic adjustment feature For an RGB signal  For a video signal or s-video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Picture Menu Adjust the level using the buttonsLight ó Dark GammaColor Temp Picture MenuMY Memory Image Menu PhaseOver Scan PositionAuto Adjust Image MenuSize Progressive Input MenuVideo NR Color SpaceComponent Input MenuVideo Format Frame LockCustom Resolution Setup Menu Using the buttons / switches the mode for mirror status Setup MenuVolume AudioScreen Menu Menu PositionBlank Start UP Screen MenuMyScreen MyScreen LockSync is OUT of Range No Input is DetectedMessage Source NameTurn on  Turn OFF Option MenuAuto Search Auto onAuto OFF Option MenuLamp Time MY ButtonFAN Speed ServiceGhost Filter MessageRemote Freq Factory ResetUse the / button to change the Projectors remote sensor InformationInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code If you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off See Live Mode in User’s Manual Network Functions for Live ModeMIU Menu PresentationSetup Dhcp Dynamic Host Configuration ProtocolMIU Menu OperationIP Address Default GatewaySubnet Mask Time DifferenceMode Network ModeEncryption SpeedMIU Restart Lamp MaintenanceCase of replacement by yourself LampType number = DT00751 Air filter Type number = NJ22222Handle Filter cover Air filter’s knob Air filterReplacing Internal Clock battery Take the old battery outWill come up. Remove the battery Put a new battery Page There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workAudio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableEither the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product LifetimeSpecifications Warranty and after-serviceSpecifications