Hitachi CP-X268A user manual Image Menu, Size, Auto Adjust

IMAGE Menu

IMAGE Menu (continued)

Item	Description
	Using the buttons ▲/▼ adjusts the horizontal size.
	Large ó Small
H SIZE	• This item can be selected only for an RGB signal.
	• When this adjustment is excessive, the picture may not be
	displayed correctly. In such a case, please reset the adjustment
	by pressing the RESET button on the remote control during this
	operation.
	Selecting this item performs the automatic adjustment feature.
	For an RGB signal
	The vertical position, the horizontal position, the horizontal phase
	and the horizontal size will be automatically set to default. And the
	aspect ratio will be automatically selected.
	Make sure that the application window is set to its maximum size
	prior to attempting to use this feature. A dark picture may still be
	incorrectly adjusted. Use a bright picture when adjusting.
	For a video signal or s-video signal
AUTO ADJUST	The video format best suited for the respective input signal will be
	selected automatically.
EXECUTE	This function is available only when the AUTO mode is selected to
	the VIDEO FORMAT item in the INPUT menu. For a component
	video signal, the signal type is identified automatically independently
	of this function.
	For a video signal, s-video signal or component video signal
	The vertical position, horizontal position and aspect ratio will be
	automatically set to default.
	For a component video signal
	The horizontal phase will be automatically set to default.
	• The automatic adjustment operation requires about 10 seconds.
	Also please note that it may not function correctly with some input.

33