OPTION Menu continued, Description, Auto Off

OPTION Menu

OPTION Menu (continued)

Item		Description

	Using the buttons ▲/▼ adjusts the time to count down to
	automatically turn the projector off.
	Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
	AUTO OFF	AUTO OFF
	ENABLE	DISABLE
		0
AUTO OFF	When the time is set to 0, the projector is not turned off automatically.
	When the time is set to 1 to 99, and when the passed time with no-
	signal or an unsuitable signal reaches at the set time, the projector
	lamp will be turned off.
	If one of the projector's buttons or the remote control buttons is pressed
	or one of the commands (except get commands) is transmitted to the
	control port during the corresponding time, projector will not be turned off.
	Please refer to the section “Turning off the power” (19).
	The lamp time is the time counted after the last resetting. It is
	shown in the OPTION menu as the usage time of the lamp.
	Pressing the RESET button on the remote control or the button ►
	of the projector displays a dialog. To reset the lamp time, select the
LAMP TIME	RESET using the button ▲.
	RESET ï CANCEL

•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

•For the lamp replacement, see the section "Lamp" (57, 58).

	The filter time is the time counted after the last resetting. It is shown
	in the OPTION menu as the usage time of the air filter.
	Pressing the RESET button on the remote control or the button ► of the
	projector displays a dialog. To reset the filter time, select the RESET using
FILTER TIME	the button ▲.
	RESET ï CANCEL
	• Please reset the filter time only when you have cleaned or replaced
	the air filter, for a suitable indication about the air filter.
	• For the air filter cleaning, see the section "Air filter" (59, 60).
	Sets the assigned function for the MY BUTTON1 and 2 buttons on
	the included remote control.
	• RGB1: Sets port to RGB1.
	• RGB2: Sets port to RGB2.
	• MIU: Sets port to MIU.
	• COMPONENT: Sets port to COMPONENT.
	• S-VIDEO: Sets port to S-VIDEO.
MY BUTTON	• VIDEO: Sets port to VIDEO.
MY BUTTON	• e-SHOT: Displays the e-SHOT menu (53).
	• INFORMATION: Displays INPUT INFORMATION (45).
	• AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE
	correction (37).
	• MY MEMORY: Loads MY MEMORY settings (31).
	• PICTURE MODE: Changes the PICTURE mode (27).
	• FILTER RESET: Displays the filter time reset confirmation dialogue (43).
	• VOLUME+: Sets the volume up.
	• VOLUME-: Sets the volume down.
	43