Hitachi CP-X955W/E specifications Outline, Features, Operating Guide, ContentsPage

Page 1

Liquid Crystal Projector

Model name

CP-X955W/E

OPERATING GUIDE

Thank you very much for purchasing this Hitachi Liquid Crystal Projector.

Please read this operating guide to use correctly. After reading this manual, keep it carefully for future reference.

Outline

This Liquid Crystal Projector can display various computer signals and NTSC/PAL/SECAM video signals.

Features

(1) High brightness

A highly efficient optical system with a metal halide lamp ensures high brightness.

(2) High resolution

Three separate high-definition liquid crystal panels are used for the R, G and B signals.

(3)Compact size, light weight for portability

(4)RGB output terminal

(5)RS232C Communication

(6)Mouse emulation

(7)Power zoom and power focus functions

(8)Complies with VESA DDC1/2B specifications

ContentsPage

Before use	3
Names and functions of each
part	8
Installation	11
Basic operations	12
Adjustments and functions ..	14
Connection to the video signal
terminals	19
Connection to the RGB signal
terminals	19
Connection to the control
signal terminal	22
Example of system setup ....	27
Cleaning the air filter	27
Lamp	28
Message table	28
When you think something
wrong	29
Specifications	30

Image 1

Contents ContentsPage FeaturesOutline Operating GuideFor the Customers in U.K Power cord Video signal cablesBefore use Video inputsLDo not install this unit in an unstable Do not look directly at the lens when the lamp is litDo not use power supplies LIf any abnormality occursDo not stare directly into the laser Aperture Be careful in handling the power cordCleaning Handle the power cord carefullyClean inside the unit at least once two years When you are not going to use for a long timeVolume Do not place this unit where it gets hotCleaning the lens Cleaning the cabinetMain unit Names and functions of each partStandby / on Laser on Remote control transmitterDisk PAD Remove the battery compartment cover Installation of liquid crystal projector InstallationView from the top View from the side View from the front View from the sideTo project the picture Basic operationsPress the STANDBY/ON button, for 1 second Plug & PlayPress the Menu buttons or the Menu on / OFF button Adjustments and functionsBrightness SET UPColor SizeImage InputBlank OPT. OptionReveal COM. Bits LanguageConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Connection to the RGB signal terminalData Hsync Initial set signalsControl signal terminal Connection to the control signal terminalMouse emulation Connection to the control signal terminal Communication Control command codeControl data table Procedure of getting the Projector status Cleaning the air filter Example of system setupConnecting various equipment Re-install the air filter Clean the air filter using a vacuum cleanerLamp Message tableIndicator display When you think something wrongDimension diagram