Hitachi CP-X955W/E specifications Names and functions of each part, Main unit, Standby / on

Names and functions of each part

Main unit

Speaker

Handle

LAMP indicator

This lights when the lamp does not light. (See page 29)

Remote control sensor

ON indicator

This blinks in the standby mode and lights in the operation mode. (See page 29)

STANDBY / ON

ON		button
LAMP		Power ON/OFF button.
		OFF sets the unit in
/ON
TEMP	STANDBY	standby mode.
		(See page 12 ~ 13)

TEMP Indicator

INPUT	This lights when
	temperature inside the
	projector is too high. (See
MUTE	page 29)

MUTE button.

ZOOM (See page 9)

ZOOM button Adjusts picture size. (See page 12)

Cooling fan	Lens	Remote control	Cooling fan
(exhaust)		sensor	(in take)

Lens cover Lever

•Use the remote control transmitter within the range of about 16 feet from the remote control sensor and within 30° to both the left and right.

FOCUS

FOCUS button

Adjusts focus. (See page 12)

MENU button

MENU	Picture adjustments.
	Refer to page 14 ∼ 18 for
RESET	details.

RESET button Resets unit to factory settings. (See page 14)

INPUT button

To select the input source.

Each time this button is pressed, the input source is changed in sequence as shown below.

RGB1 RGB2 VIDEO1 VIDEO2

VIDEO input terminal

(on video-equipped models only)				RGB input terminal
S-VIDEO input terminal			RGB IN
Mini DIN 4pin connector (1/2)	S-VIDEO VIDEO L AUDIO	R		RGB input terminal
VIDEO input terminal
				D-sub 15pin shrink
RCA Jack (1/2)
				terminal (1/2)
AUDIO L/R input terminal
RCA Jack (1/2)				RGB output terminal
	AUDIO		AUDIO	RGB output terminal
	AC SW	IN	OUT	D-sub 15pin shrink
			RGB OUT
				terminal
	AC IN
				RGB output can be displayed
MAIN POWER switch
				even in the standby mode.
Main power ON/OFF switch.			CONTROL
				CONTROL terminal
\: OFF
⎪ : ON				D-sub 15pin shrink terminal
AC IN socket			AUDIO output
Connect the provided			terminal (RGB/VIDEO)
power cord.			Stereo mini jack

AUDIO input terminal

Stereo mini jack (1/2)

8