Installation
Example of the projector and screen installation
Determine picture size and projection distance as illustrated below.
View from the top | View from the side |
Screen
Lens center
b
a
Screen (inch) | a (inch) | b (inch) | |
|
| ||
| Minimum | Maximum |
|
|
|
|
|
40 | 60 | 89 | 3.4 |
|
|
|
|
60 | 89 | 134 | 5.1 |
|
|
|
|
80 | 119 | 179 | 6.9 |
|
|
|
|
100 | 149 | 224 | 8.6 |
|
|
|
|
120 | 179 | 269 | 10.3 |
|
|
|
|
150 | 224 | 336 | 12.9 |
|
|
|
|
200 | 298 | 448 | 17.2 |
|
|
|
|
a:Distance from the projector to the screen. (±10%)
b:Length from the center of the lens to the bottom of the picture. (±10%)
This screen size is
Installation of liquid crystal projector
Please basically use liquid crystal projector at the horizontal position.
If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and become the cause of damage.
How to use foot adjusters
Adjust the projection position using the foot adjusters at the bottom of the projector.
View from the front | View from the side |
unlock ← | → lock |
Foot adjuster
A viewing angle of 2° ~ 12° can be changed.
1.Lift up the projector, unlock the foot adjusters.
2.Adjust a viewing angle, and then lock the foot adjusters complete.
3.To adjust the angle slightly, revolve the foot adjusters.
Caution
Do not unlock the foot adjusters while you do not support the projector, to avoid falling of the projector and causing an injury.
Do not revolve the foot adjusters by force, the foot adjusters is damaged.
If the foot adjusters do not lock completely, move the foot adjusters a little before locking.
11