Hitachi CP-X955W/E LIf any abnormality occurs, Do not insert any foreign object, Place

Page 4
Pull out the power plug from the power outlet.

[Safety precaution]

Warning

LIf any abnormality occurs.

When there is an abnormal smell or smoke, if

you use this unit as it is, this could cause a fire

or electric shock, etc. When an abnormality is

found, immediately turn off the power switch

and pull out the power plug from the power

outlet. Check that there is no smoke, etc., then

contact your dealer to repair the unit. Do not

LDo not look directly at the lens when the lamp is lit.

Do not look directly at the lens when the lamp is lit. Since a strong light is used, it could damage you vision, etc.

Especially pay attention if children are present.

LDo not insert any foreign object.

repair it yourself as it is very dangerous.

Do not use this unit as it is

after trouble has occurred, such as “No picture”, “No sound”, “Abnormal

sound”, etc. This may cause a fire, electric shock, etc. In this case immediately turn

off the power switch and disconnect the power plug, then contact your dealer to repair the unit.

If water, etc. enters inside the unit, turn off the

Do not insert a metal or flammable object inside through the ventilation holes, etc. This may cause a fire, electric shock, etc.

If foreign matter enters inside, turn the power switch off and disconnect the power plug from the power outlet and contact your dealer. If you use as it is, it may cause a fire, electric shock, etc. Be careful especially if children could touch the unit.

Pull out the power plug from the power outlet.

power switch of the unit first and disconnect the power plug and then contact your dealer. If you use it as it is, it may cause a fire, electric shock, etc.

LDo not install this unit in an unstable

place.

Avoid placing it in an unstable place

LDo not apply any shock.

If you drop this unit or if the cabinet is broken, turn off the power switch, disconnect the power plug and contact your dealer. If you use it as it is, it may cause a fire, electric shock, etc.

Pull out the power plug from the power outlet.

such as weak base, inclined floor,

etc. This may cause it to drop or fall

over, resulting in injury.

LDo not open the cabinet.

L Do not remodel this unit.

Do not remodel this unit. It may cause a fire, electric shock, etc.

Prohibition of disassembly

Do not open the cabinet. There are high voltage parts inside the cabinet and this may cause an electric shock. Ask your dealer to check inside and adjust and repair the unit.

Electric shock

Prohibition

hazard

of

 

disassembly

L Do not put a container, etc. with liquid

on this unit.

Do not put a vase, flowerpot, cosmetic

container, medicine or water and small

metal objects on this unit. If liquid

spills and enter inside the unit, it may

cause a fire, electric shock, etc.

LDo not use this in a bathroom, etc.

Do not use this unit in a bathroom, etc. This may cause a fire, electric shock, etc.

Do not use near water

L Do not use power supplies

other than that specified.

Do not use this unit with a power

voltage other than specified power supply

voltage. It may cause a fire, electric shock, etc.

4

Image 4
Contents Features ContentsPageOutline Operating GuideFor the Customers in U.K Video signal cables Power cordBefore use Video inputsDo not look directly at the lens when the lamp is lit LDo not install this unit in an unstableDo not use power supplies LIf any abnormality occursBe careful in handling the power cord Do not stare directly into the laser ApertureHandle the power cord carefully CleaningClean inside the unit at least once two years When you are not going to use for a long timeDo not place this unit where it gets hot VolumeCleaning the lens Cleaning the cabinetMain unit Names and functions of each partStandby / on Laser on Remote control transmitterDisk PAD Remove the battery compartment cover Installation Installation of liquid crystal projectorView from the top View from the side View from the front View from the sideBasic operations To project the picturePlug & Play Press the STANDBY/ON button, for 1 secondAdjustments and functions Press the Menu buttons or the Menu on / OFF buttonSET UP BrightnessColor SizeInput ImageBlank OPT. OptionReveal Language COM. BitsConnection to the video signal terminals Connection to the RGB signal terminalConnection to the RGB signal terminal Example of computer signalInitial set signals Data HsyncControl signal terminal Connection to the control signal terminalMouse emulation Connection to the control signal terminal Control command code CommunicationControl data table Procedure of getting the Projector status Cleaning the air filter Example of system setupConnecting various equipment Clean the air filter using a vacuum cleaner Re-install the air filterLamp Message tableWhen you think something wrong Indicator displayDimension diagram