Hitachi CP-X955W/E specifications Before use, Video signal cables, Power cord, Video inputs

Page 3

WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications, Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Instructions to Users:

This equipment complies with the requirements of FCC (Federal Communication Commission) Class A equipments provided that following conditions are met.

(1)Video signal cables:

Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal pipes or similar way to reduce the interference noise radiation.

(2)Power cord:

Shielded power cord must be used. The outer shield must be connected to the ground.

(3)Video inputs:

The input signal amplitude must no exceed the specified level.

Before use

<Before Use>

Illustrated marks Various illustrated marks are used in this product and instruction manual so the product is used correctly and safely, and also to protect you and others from danger and your property from being damaged.

Warning Caution

This shows that a person could be killed or injured if the wrong operation is done by ignoring this indication.

This shows that a person could be injured or material may be damaged if the wrong operation is done by ignoring this indication.

Examples of illustrated marks

The mark informs you that there is a warning (including caution).

The concrete details of the warning (the left diagram shows the caution for an electric shock hazard) is shown in the diagram.

The mark informs you of a prohibited action. The concrete prohibited action (the left diagram shows the prohibition of disassembly) is drawn in the diagram or near it.

The mark informs you of actions you must do. The concrete instruction details (the left diagram shows “Disconnect the power plug from the power outlet”) is drawn in the diagram.

3

Image 3
Contents Operating Guide FeaturesContentsPage OutlineFor the Customers in U.K Video inputs Video signal cablesPower cord Before useLIf any abnormality occurs Do not look directly at the lens when the lamp is litLDo not install this unit in an unstable Do not use power suppliesDo not stare directly into the laser Aperture Be careful in handling the power cordWhen you are not going to use for a long time Handle the power cord carefullyCleaning Clean inside the unit at least once two yearsCleaning the cabinet Do not place this unit where it gets hotVolume Cleaning the lensNames and functions of each part Main unitStandby / on Remote control transmitter Laser onDisk PAD Remove the battery compartment cover View from the front View from the side InstallationInstallation of liquid crystal projector View from the top View from the sideTo project the picture Basic operationsPress the STANDBY/ON button, for 1 second Plug & PlayPress the Menu buttons or the Menu on / OFF button Adjustments and functionsSize SET UPBrightness ColorImage InputOPT. Option BlankReveal COM. Bits LanguageConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Connection to the RGB signal terminalData Hsync Initial set signalsConnection to the control signal terminal Control signal terminalMouse emulation Connection to the control signal terminal Communication Control command codeControl data table Procedure of getting the Projector status Example of system setup Cleaning the air filterConnecting various equipment Message table Clean the air filter using a vacuum cleanerRe-install the air filter LampIndicator display When you think something wrongDimension diagram