Kodak i30 / i40 manual Connecting the USB, Cable

Page 16

Connecting the USB	IMPORTANT: If you have not installed the Kodak Driver Software,
cable	do that now before proceeding.
	The following instructions explain the connection of the USB cable
	between your scanner and PC. You need to identify the USB port on
	your PC. If you installed the USB 2.0 card, use that port, otherwise use
	the USB port on your PC.
	The USB cable supplied with your scanner has two different ends.

A

B

Turning on the scanner and finalizing Kodak Driver Software installation

1.Attach the B end of the USB cable to the scanner USB port, located on the back of the scanner.

2.Attach the A end of the USB cable to the proper USB port on your PC.

NOTE: If you installed a USB card, use one of those ports, or use your PC’s USB port. See your PC manufacturer’s documentation for the location of the USB port.

When the USB cable and power connections have been made, and the Kodak Software Drivers have been properly installed, the installation will be complete when the scanner is turned on.

A-61512 May 2006

13

Image 16

Contents User’s Guide Contents Maintenance Introduction Scanner features Safety and regulatory Safety informationAgency approvals United States EMC statementsJapan Power system Acoustic emissionConnection European UnionGetting Started What’s in the box System requirementsAttaching the input tray Select Install Scanner Software Installing the Kodak Driver SoftwareAttaching the output tray and special document feeder Page Page Select USB Test United States Canada China power cord Connecting the USB CablePage Installing application SoftwareScanner components Front viewInside view Back viewAdjusting the input and output trays Turning the scanner on and offStart and stop scanning Front-feed minimum/center alignment 6.35 x 5.08 cm 2.5 x 2.0Verifying your scanner installation Page Page Viewing test images Application softwareConfiguring functions ManagerPage Installing Configuring ReadirisSelect Scanner Model Page Assigning function NumbersUsing function numbers Scanning your documents Scanning documents using the special document feeder Common terms OverviewBi-tonal or Binary black-and-white Making camera SelectionsExample 1 scanning a two-sided color document both sides ColorStarting the Scan Validation Tool Scan Validation Tool dialog box Kodak Scanner Properties dialog box Using the Twain DatasourceButtons on the Kodak Scanner Properties dialog box Imaging tab Page Disabled No Noise Filter Used Dpi 80 Threshold 200 dpi Contrast 100 Page Page Paper tab Cropping valuesPage 61512 May Page Better, Best, Superior Dropout tabRemove Red, Remove Green, Remove Blue Multifeed tab Options tab Setup tab Tool, via the Twain DatasourceInfo tab Using the Isis Driver Scanner Settings dialogSettings dialog box BoxCamera Settings area Page Page Fixed thresholding ATP disabled Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast More Scanner Settings dialog box Image Control options Black on White polarity White on Black polarity Color Dropout options Scanner Control Dialog boxMulti-Feed Detection OptionsDefining the Scan area Area Maintenance Cleaning the rollers Cleaning the feed moduleCleaning the calibration area Replacing the feed ModuleSupplies and consumables Indicator lights and error codes Clearing a document jamProblem solving Problem Possible Solution61512 May Scanner not working Page Page Connection Testing for a USB\program files\Kodak\Document Imaging\usbtst.exe Solutions Your operating system only supports USBYou do not need to install any additional USB cards USB will not workAppendix a Specifications Eastman Kodak Company