Kodak i30 / i40 manual 61512 May

First image in a batch appears “washed	If the scanned documents in a batch have more than a 25 degree skew,
out”	the first image in the batch may appear washed out. Be sure that
	documents are placed in the input tray with the edges aligned and the
	side guides positioned correctly to accommodate the size documents
	you are feeding to avoid large skew angles.
Image appears to be cut off	If you are scanning a document with a reflective area (such as a
	hologram on a credit card), and this reflective area is fed “face up” and
	off-center such that it passes over the left-edge sensor, the sensor will be
	triggered as if it were the end of the page and will result in a cut-off
	image.
	• Rescan the document by feeding it face down.
Images are not being cropped correctly	• If auto or aggressive cropping is enabled, and your images are not
	being cropped correctly, clean the white background strips in the
	imaging area.
	See the procedures in Chapter 5, Maintenance “Cleaning the imaging
	area.
Roller marks appear on the document	Clean the rollers. See the procedures in Chapter 5, Maintenance.
after scanning
Images have black background bleed-	When scanning translucent documents, black bleed-through may be
through	displayed on the image. To minimize this, adjust the Contrast value or
	select Fixed Processing to improve the image. For more information on
	Contrast and Fixed Processing, see Chapter 4, Image Processing.

A-61512 May 2006 73