
Making camera | When you launch the Kodak Scan Validation Tool, you will be making |
selections | selections on the dialog boxes to set up your images for scanning test |
| documents. Both TWAIN and ISIS have camera selection boxes that |
| refer to the cameras within the scanners. Following are some examples |
| of choosing the correct camera for the desired results. For the purpose |
| of these examples, the TWAIN Datasource has been used. |
| Example 1: scanning a |
| color |
| If you want to scan a |
| selections as follows: |
Camera selection | Result - Side 1 | Result - Side 2 |
•Select both Front Color and Rear Color. Depending on which camera (in this example, Front Color) is highlighted, will depend on which side of the document is scanned first. The result is two images in color.
Example 2: scanning a
If you want to scan only the front side of a color document in
Camera selection | Original - Side 1 | Result - Side 1 |
•Select and highlight Front Bitonal. The resultant image will be the front side of the document in
33 |