More Scanner Settings dialog box
Additional image processing values unique to the i30/i40 Scanners are available when you choose the More button on the Scanner Settings dialog box.
Camera settings area
The selections in the Camera area list the available sides (front and back) of an image where you can define individual image processing values.
When starting the configuration process, use the steps below as a guide:
1.Check the images you wish to capture (Enable camera settings).
2.Select the order to transfer the images (Color First/Binary First).
3.Configure each image by highlighting it (Configure).
Enable camera settings select the desired checkbox to enable the Front Color, Front Binary, Back Color or Back Binary settings as desired. This indicates the images you wish to capture and transfer to the host PC. (It is possible to capture only rear images.) You can enable your selection by putting a checkmark in the desired box.
Color First/Binary First define the transfer order by selecting the Color First or Binary First radio button. This determines which image is transferred to the host PC first when using simultaneous output scanning. For example, if you are scanning front color and front binary and you select Binary First the scanner will return the front binary image, then the front color image.
Configure highlight the image you want to setup. As you select the image, other options will become available on the More Scanner Settings dialog box. The availability of these options is dependent upon the selection you make.
| 59 |