Replacing the feed | Degradation of feeder performance, multiple feeds, stoppages, etc. |
module | indicate a need to change the feed module. Certain paper types such |
| as carbonless paper or newsprint, or failure to clean regularly, and/or |
| use of |
| module life. |
| For additional feed modules, see the next section “Supplies and |
| consumables”. |
| 1. Open the scanner cover by pressing the release lever. |
2.Squeeze the plastic clamps that hold the feed module in place and lift the feed module out of position.
3.Insert the new feed module into position, aligning the new module into the slots, and pushing it in until it snaps into place.
4.Close the scanner cover.
| 69 |