Kodak i30 / i40 manual Your operating system only supports USB, Solutions

Page 81

USB connection issues The USB verification tool will check your operating system and hardware capability to determine if you have a functioning USB 2.0 or if you need to install a USB card.

Your operating system is correctly configured to support USB 2.0.

If a functioning USB 2.0 port is present, this dialog box will be displayed.

Your operating system supports USB 2.0, however, a USB 1.1 port was found.

If your PC does not have a USB 2.0 port installed, you should install a USB 2.0 Accessory card.

If a USB 2.0 port or card is installed and the USB test tool does not recognize the USB card as 2.0, try installing or updating the drivers for that card.

Your operating system only supports USB 1.1

There are some host PC operating systems that will not support USB 2.0, but support USB 1.1 (e.g., Windows 98SE). The Kodak i30 and i40 Scanners are rated and designed to operate with USB 2.0, but will function in a USB 1.1 port, however, the scanner will only perform at a USB 1.1 speed.

Solutions:

Update your operating system to one that supports USB 2.0, such as, Windows 2000 or Windows XP.

You may add a USB 2.0 card, however, the scanner will only perform at a USB 1.1 speed.

78

A-61512 May 2006

Image 81
Contents User’s Guide Contents Maintenance Introduction Scanner features Safety information Safety and regulatoryAgency approvals EMC statements United StatesJapan Acoustic emission Power systemConnection European UnionWhat’s in the box System requirements Getting StartedAttaching the input tray Installing the Kodak Driver Software Select Install Scanner SoftwareAttaching the output tray and special document feeder Page Page Select USB Test United States Canada China power cord Cable Connecting the USBPage Software Installing applicationFront view Scanner componentsBack view Inside viewTurning the scanner on and off Adjusting the input and output traysFront-feed minimum/center alignment 6.35 x 5.08 cm 2.5 x 2.0 Start and stop scanningVerifying your scanner installation Page Page Application software Viewing test imagesManager Configuring functionsPage Configuring Readiris InstallingSelect Scanner Model Page Numbers Assigning functionUsing function numbers Scanning your documents Scanning documents using the special document feeder Overview Common termsBi-tonal or Binary black-and-white Selections Making cameraExample 1 scanning a two-sided color document both sides ColorStarting the Scan Validation Tool Scan Validation Tool dialog box Using the Twain Datasource Kodak Scanner Properties dialog boxButtons on the Kodak Scanner Properties dialog box Imaging tab Page Disabled No Noise Filter Used Dpi 80 Threshold 200 dpi Contrast 100 Page Page Cropping values Paper tabPage 61512 May Page Dropout tab Better, Best, SuperiorRemove Red, Remove Green, Remove Blue Multifeed tab Options tab Tool, via the Twain Datasource Setup tabInfo tab Scanner Settings dialog Using the Isis DriverSettings dialog box BoxCamera Settings area Page Page Fixed thresholding ATP disabled Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast More Scanner Settings dialog box Image Control options Black on White polarity White on Black polarity Color Dropout options Dialog box Scanner ControlMulti-Feed Detection OptionsDefining the Scan area Area Maintenance Cleaning the feed module Cleaning the rollersCleaning the calibration area Module Replacing the feedSupplies and consumables Clearing a document jam Indicator lights and error codesProblem Possible Solution Problem solving61512 May Scanner not working Page Page Testing for a USB Connection\program files\Kodak\Document Imaging\usbtst.exe Your operating system only supports USB SolutionsUSB will not work You do not need to install any additional USB cardsAppendix a Specifications Eastman Kodak Company