Primera Technology LX900 user manual Printhead / Cartridge Replacement Procedure

Page 54

TOC

INDEX

PRINTHEAD / CARTRIDGE REPLACEMENT PROCEDURE

If you think your cartridge/printhead is defective, please con- tact tech support to arrange for a replacement. Tech support may ask you to perform troubleshooting before sending a replacement cartridge or printhead.

Notes on Ink Replacement

All replacements for defective cartridges or printheads must be processed through Tech Support.

To receive replacement cartridges, you may be required to send in your defective cartridges/Printhead.

Tech Support will perform the cleaning procedures and tests mentioned above on all cartridges received.

Tech Support will not replace cartridges with less than 50% ink remaining.

Notes on Printhead life

The estimated printhead life is approximately 10,000 prints using a 4" x 3" 100% coverage label. The number of prints you can expect to receive from one printhead varies from printhead to printhead.This is not a guaranty that the printhead will always last 10,000 prints. There are many variables that could extend or shorten the life of the printhead.

To ensure uninterrupted printing capability, purchase a backup print head now. You can purchase a printhead from www.primerastore.com

Semi-Permanent Print Head - Part Number 53450

50Troubleshooting and Maintenance

Image 54
Contents 062211-511271 All rights reserved Printing History Table of Contents Interactive Feature Getting Started Thank YOU…Choosing a Good Location Unpacking and Inspection Identifying the Parts Computer Specifications Recommended PC SpecificationsLabel and Roll Specifications Label StockTOC Index Label Side Out Roll O.D Installing Label Stock Roll Guide Movable Throat Guide Fixed Throat Guide Adjusting the Label Stock TOF TOP of Form Sensor Circular LabelsThrough-Hole Labels SET the Stock Sensor Mode SET the Output Mode TOC Ink Cartridges Status Monitor Monitoring INK Levels Using the Cost Estimator Replacing INK Cartridges / LOW INK Warning TOC TOC Using Nicelabel PrintingTOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC Printing from Other Programs Adjusting Print Alignment TOC Creating a Full Bleed Print Printer Driver Settings To find Driver Settings Paper Size Portrait LandscapeColor Matching Ink Saturation Troubleshooting and Maintenance Solving Print Alignment ProblemsImage is Vertically Offset Image is printing horizontally offset Solving Print Quality Problems Maintenance Station Color Matching and Design Tips DPI Image printed with the LX900 TOC Cleaning the Printer Create a Support ReportCleaning the Printhead 3B. Deep clean the cartridge 3C. Preventing clogged nozzlesPrinthead / Cartridge Replacement Procedure Semi-Permanent Print Head Part NumberReplacing the Printhead Ink Feed Unload Press Pause + Load/Feed to Start and FinishTOC Now align the print head as described in B Technical Support Interpreting the PRINTER’S Indicator LightsExplanation Source LocationSection Technical Specifications Media TypesIndex DPI11, 33, 35