TOC | INDEX |
C. IDENTIFYING THE PARTS
This illustration shows the front of the printer with its control buttons and LED indicator lights.
| Top Cover |
Pause Button | Pause LED |
| |
Power LED |
|
Load/Feed |
|
Button |
|
Ink Low LED |
|
Unload Button | Label Tear Bar |
The Pause Button pauses the printer AFTER the printing of the current label has finished to allow for loading of label stock and ink cartridge.
The Power LED indicates that the printer is on and ready to receive print jobs.
The Load/Feed Button is pressed in order to load label stock if the printer does not automatically detect the stock. When stock is loaded each press of the button will cause one label to be fed from the printer.
The Ink Low LED will illuminate when a cartridge has 10% or less of its ink remaining.
The Unload Button will unload the installed label stock by reversing it through the printer. Make sure to tear off the printed labels before pressing the Unload Button.
The Label Tear Bar is a serrated edge for conveniently tearing your finished labels from the printer. The printer comes with a white tear bar guard. For smoother label feeding, leave the guard in place during printing. When you are ready to tear off a label, remove the guard, tear off the label and replace it.
Getting Started 3