TOC | INDEX |
Section 2: Label Stock
A. LABEL AND ROLL SPECIFICATIONS
A wide variety of label stock can be used in the Printer. Refer to the specifications and settings in the following sections before ordering custom stock from Primera or any stock from another company.
Important! Test all custom made label stock with the intended printer before ordering large quantities! Primera will only assume responsibility for custom label stock ordered from Primera.
Label Sensing Methods
Method 1: Label
Gap Sensing
Method 2: Thru-Hole Sensing
Method 3: Reflective/Black Mark Sensing
(Black Mark must be printed on back side of label stock)
Label Width |
|
Liner Width |
|
| Gap Between |
| Labels |
Distance from |
|
edge of Media |
|
Width of Opening |
|
Distance from | Label Height |
edge of Media |
|
to edge of Label |
|
| Black Mark |
| Width |
Note: See table below for Max and Min values in inches and mm..
Label Stock 5