Lanier 5627 Setting Procedure, Key Enter the desired name and press OK, Select the item to be set

Initial Scanner Setup

Setting Procedure

A Press the {User Tools/Counter/Inquiry}

key.

E Enter the desired name and press [OK].

F

2

Reference

For information about character input, see the System Settings manual.

Select the item to be set.

The User Tools/Counter/Inquiry screen appears.

B Press [Scanner Features].

To select an item, touch its key on the screen. The item is highlighted.

Example: resolution setting

The Scanner Features screen ap- pears.

C Verify that the [Basic Settings] tab is shown.

D Verify that [Program/Change] is se- lected, and then select the scan setting you want to program.

The screen for entering a scan set- ting name appears.

Example: image density setting

Note

❒When selecting [Custom size] for [Scan Size], see p.16 “Selecting a custom size”.

G When all settings have been made, press [OK].

The scan type setting is stored.

H To program other scan settings, repeat the procedure from step D.

15