Xerox 4220/MRP, 4230/MRP, 4219/MRP manual Laser safety, Operational safety, Do this

Page 4

NOTICES

Laser safety

Your printer complies with appropriate safety standards.

Specifically regarding lasers, the equipment complies with laser product performance standards set by governmental, international and national agencies as a Class 1 laser product. It does not emit hazardous light; the beam is totally enclosed during all phases of customer operation and maintenance.

WARNING: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure..

Be aware of all labels that warn you against removing panels or covers. See the example below of a label located behind the front cover, below the on/off switch.

DANGER - Invisible laser radiation when open and interlock defeated for service.

AVOID DIRECT EXPOSURE TO

BEAM

Instructions for safe service are in SERVICE MANUAL.

These laser warning labels are placed on panels that cover areas that are not operator servicable. These panels are not to be removed.

Operational safety

Your Xerox equipment and supplies are designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.

Attention to the following notes ensures the continued safe operation of your equipment.

Do this

Always connect equipment to a properly grounded power source receptacle. If in doubt, have the receptacle checked by a qualified electrician.

WARNING: Improper connection of the equipment grounding conductor can result in electrical shock.

Always place equipment on a floor with adequate strength for the weight of the machine.

Always have your qualified service representative move or relocate the equipment.

iv

XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Xerox MRP Family 4215/MRP, 4219/MRP, 4220/MRP, 4230/MRP Page Canada SafetyEurope 50 Hz, 220 to 240 V equipment Operational safety Laser safetyDo this Do not do this Xerox MRP Family FAX Modem for MS-DOS Operator Guide Table of contents Administering the fax software OperationFax Setup menu TroubleshootingAppendices IndexPage Introduction About this guideConventions Text conventionsProcedure conventionsÐprinter Procedure conventionsÐMS-DOSKeyboard key Key+keyInstallation Fax printer utilityBefore you begin installation Hardware and software requirementsInstallation procedure Selecting the hard disk and directoryPrinter port selection Users Fax ªFromº Information screenTelephone Settings screen Code FunctionInstallation Windows Installation screen Fax Pop-up Menu for DOS Applications Automatic Loading Option screen Readme File Options screen Windows installations Initial settingsSerial port printer connections Changing the Windows Installation Loading the fax software in MS-DOSUnloading fax software from system memory Installing fax software on a networkLoad order Timeout settings Printer portUsing the Fax Pop-up menu OperationSending a fax from a MS-DOS application Through Dialing numbers Sound the tones corresponding Operation Using the Phonebook in MS-DOS Using the Phonebook to send a faxAdding Phonebook entries Editing a Phonebook entryBroadcast fax Using the Phonebook to broadcast a faxDeleting a Phonebook entry Using the Group Phonebook to broadcast a fax Using the Group Phonebook for a broadcast messageCreating a Group Phonebook entry Editing the Group Phonebook entryAccessing the Advanced Fax Options screen Using advanced fax options in MS-DOSDelaying a fax transmission Operation Fax job resolution Setting outside access codesUsing fax software in Windows Making choices in the fax software dialog boxesSending a fax from a Windows application Printing a fax from a Windows application Using the Phonebook in Windows Adding a Phonebook entryUsing the Phonebook for broadcast fax Using the Group Phonebook for a broadcast fax Creating a Group PhonebookDelaying fax transmissions Fax options in the Windows environmentSetting the fax job resolution Changing the outside access code Page Administering the fax software Changing the fax software basic settingsEnabling the Fax Pop-up menu Changing the basic settings with the install programChanging the hot-key combination example Running the INSTALL/A program Setting advanced options with INSTALL/APrinting and editing internal settings Number of rings before answer Fax machine identification Transmission Status ReportsNumber of retries Retry intervalEditing fax timeout settings Automatic Activity Report Y/NTimestamp each fax Y/N Set fax clock Time/DataSpecifying the fax job start timeout Specifying the fax job end timeoutEditing the fax printer password Editing printer port redirectionAdministering the FAX Software Using the Fax Manager utility Displaying and editing the fax queueCanceling or rescheduling a delayed fax transmission Printing an activity log Importing/Exporting Phonebook files Administering the FAX Software Fax Setup menu Fax Setup menu Send/Receive Setup submenus Fax setup item descriptions Fax ModeClock Setup DateSend Setup Receive Setup Automatic Tray SwitchingHeader Ring CountSetting tray 1 as the default input tray for fax received Fax setup configuration examplesOutput Destination Disabling automatic tray switching for fax received Press the Enter keySetting the date Through 9 7. Use the numeric keypad to enter the dateSetting the time Setting the redial count for a send configurationTurning the speaker off for a send configuration Press the Enter key to reenter print mode to begin printing Troubleshooting Fax software error messagesEnable FIX for Keyboard CTRL-LOCK Problems encountered when using the fax software Fax Setup menu error messages Fax Setup menu error messagesFax Setup menu error messages Result/Reason Action Date / Day entry is less than Press the Clear/C key at Printer Configuration Report Troubleshooting Page Adding memory Performance enhancementAdding a hard disk Page Related publications Related publicationsXerox MRP Family publications InternationalTCP/IP Index Fax Passwords See also Group PhonebookPSFAX.COM Windows, see Microsoft Windows environment
Related manuals
Manual 56 pages 52.48 Kb Manual 274 pages 19.57 Kb

4220/MRP, 4219/MRP, 4230/MRP specifications

The Xerox 4219/MRP, 4220/MRP, 4215/MRP, and 4230/MRP are multifunction printers designed for businesses that require efficient printing, copying, and scanning solutions. These models exemplify Xerox's commitment to quality, reliability, and user-friendly features, making them ideal for both small and medium-sized enterprises.

One of the main features of these models is their versatility. They handle a wide range of paper formats, from letter-sized documents to larger legal-sized prints, and support various media types, including glossy and plain paper. This flexibility allows businesses to produce everything from basic documents to vibrant marketing materials without the need for multiple devices.

The Xerox 4219/MRP is noted for its compact design, making it suitable for office environments with limited space. It offers a robust printing speed of up to 19 pages per minute, ensuring fast document output. It incorporates advanced digital technology, ensuring that each print is sharp and clear, providing excellent image quality for both text and graphics.

In contrast, the Xerox 4220/MRP features enhanced printing speed, reaching up to 20 pages per minute. This model is ideal for teams that require higher volumes of prints on a daily basis. Both the 4219 and 4220 models come equipped with intuitive touch-screen controls, simplifying user interactions and minimizing training time.

The Xerox 4215/MRP stands out with its affordability and energy efficiency. This model is designed for budget-conscious businesses without compromising performance. It features automatic duplex printing, which reduces paper usage and cuts down operational costs. Its compact build and easy installation process make it a practical choice for any workspace.

The Xerox 4230/MRP, on the other hand, is designed for higher productivity needs, boasting a printing speed of up to 30 pages per minute. It incorporates advanced connectivity options, including wireless printing capabilities, mobile printing support, and integration with cloud services. This feature enables employees to print from various devices seamlessly, enhancing workflow efficiency.

All four models utilize Xerox’s proprietary imaging technology, ensuring exceptional image quality and consistent performance over time. They also come equipped with security features to protect sensitive information, such as password-protected printing and user authentication protocols.

In summary, the Xerox 4219/MRP, 4220/MRP, 4215/MRP, and 4230/MRP offer a range of features suitable for different business needs, from high-volume printing to cost-effective solutions. Their advanced technologies, user-friendly interfaces, and robust performance make them reliable choices for any modern office.
Top Page Image Contents