Fuser Area
If jammed in the fuser area, ‘PAPER JAM 1’ appears in the display.
WARNING: The fuser area is hot. Take care when removing paper from the machine.
Press the release latch to open
the side cover.
Pull down on the fuser lever as shown below. This will release pressure on the paper.
If paper is not seen in this area, skip to the Exit Area.
Troubleshooting
CAUTION: Do not pull paper up through the fusing unit. Unfused toner may adhere in the area, resulting in smudged copies.
Remove the jammed paper, in
the direction shown.
Xerox WorkCentre M15/M15i User Guide | Page |