LCD Error Messages
If an abnormal condition arises in the machine or an incorrect operation is performed, a message indicating the nature of the error is displayed. If this happens, take the corrective action listed in the following table.
DISPLAY | MEANING | SOLUTION |
|
|
|
Bypass Jam | The machine detects non feeding from | Load paper in the bypass tray. |
| the bypass tray. |
|
|
|
|
Document Jam | The loaded document has jammed in | Clear the document jam. Refer to |
| the ADF. | “Document Jams” on page |
|
|
|
Door Open | The side cover is not securely latched. | Close the side cover until it locks into |
|
| place. |
|
|
|
Drum Warning | The drum cartridge is near the end of | Ensure a replacement cartridge is in |
| life. | stock. Replace the Drum cartridge |
|
| when copy/print quality is degraded. |
|
| This may show up as dark marks on |
|
| the edge of the page. Refer to “Drum |
|
| Cartridge” on page |
|
|
|
Duplex Jam | Paper has jammed in the middle of 2- | Clear the jam. Refer to “Duplex Jam” |
| sided printing. | on page |
|
|
|
Fuser Error | There is a problem in the fuser unit. | Unplug the power cord and plug it back |
|
| in. If the problem still persists, please |
|
| call for service. |
|
|
|
LSU Error | A problem has occurred in the LSU | Unplug the power cord and plug it back |
| (Laser Scanning Unit). | in. If the problem still persists, please |
|
| call for service. |
|
|
|
Overheat | The printer has overheated. | The machine will automatically return |
|
| to standby mode when it cools down to |
|
| the normal operating temperature. If |
|
| the problem persists, call for service. |
|
|
|
No Developer Cartridge | The toner cartridge is not installed. | Install the toner cartridge. Refer to |
|
| “Toner Cartridge” on page |
|
|
|
No Paper | The recording paper in the paper | Load the recording paper in the paper |
| cassette has run out. | cassette. |
|
|
|
Troubleshooting
Xerox WorkCentre M15/M15i User Guide | Page |