3. Operation
Menu Structure
Please note:
•When selecting the baud rate for either
•When selecting the byte format, the user has these choices:
~N81, (one start bit, eight data bits, one stop bit and no parity bit)
~E71, (one start bit, seven data bits, one stop bit, even parity)
~O71, (one start bit, seven data bits, one stop bit, odd parity.)
•Hardware handshaking can be set to ON or OFF.
opJQUR=pÉííáåÖë=jÉåì
From the System Menu, select
|
|
|
|
|
|
| |
| > Baud Rate | [57600] |
|
| Handshaking | [OFF] |
|
| Node Number | 17 |
|
|
|
|
|
Figure 3-9. MatrixPRO RS-485 Settings Menu
This menu allows the adjustment of the node number in the conventional manner. The node number can range from 1 to 32. After a factory reset or an
fm=^ÇÇêÉëë
From the System Menu, select IP Address to display the IP Address Menu.
IP Address
192.168.000.242
^
Figure 3-10. MatrixPRO IP Address Menu
When this menu item is selected, the cursor (^) will be positioned under the
To adjust the IP address:
1.The value of the number can be modified upward by rotating the selector knob clockwise (CW).
2.Press SEL to update the number and advance the cursor one place to the left.
3.Repeated presses of the SEL key will advance the cursor through the numeric fields, skipping the
22 |
| MatrixPRO • 16x16 and 8x8 |
|