Barco 8x8, HD/SD-SDI, 16x16 manual Oqbjm=çìí=áå, Pra=ãçÇÉ=, Pjlab=ãçÇÉ=xQURáÇz, Ptfq`e=ãçÇÉ

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä

MatrixPRO Remote Commands

oqbjm=çìí=áå

•Description: Routes input to output. If the output is in a group, all the outputs in the group will be routed to the input specified. If the output is in a I/O group but the input is not in the group, the command will be ignored.

•Parameters:

out Output number; [1 - 16]

in Video Input number to route video; [1-16] / 101 if no input to add

/0 unroutes input

•Query: RTEMP? out; Returns the current video inputs routed to the specified

output in the format: =in

S Examples:

RTEMP 1 3 (Route to output 1, video input 3.)

RTEMP 4 101 (Route to output 4.)

p_^ra=ãçÇÉ=

•

•

Description: Serial Baud Rate. Selects between 19.2, 28.8, 38.4, or 57.6K baud.

Parameters:

mode Mode; [0123], 19200288003840057600

•Query: SBAUD? Returns the current serial baud in the format: =mode

S Example: SBAUD 0 (Sets Serial baud rate to 19200.)

pjlab=ãçÇÉ=xQURáÇz

•Description: Serial Mode. Selects between RS-232 or RS-485 serial modes. If select RS-485 mode, also need to specify RS-485 ID.

•Parameters:

mode Mode; [01], RS-232RS-485

485id RS-485 ID for the MatrixPRO.

This field is ignored if switching to RS-232 mode.

•Query: SMODE? Returns the current serial mode in the format: =mode 485id

S Examples:

SMODE 0 (Sets Serial mode for RS-232.)

SMODE 1 10 (Sets Serial mode for RS-485 with ID 10)

ptfq`e=ãçÇÉ

•Description: Video switching mode. Enables vertical interval switching using the input on channel 1.

•Parameters:

mode Mode; [01], OffOn

•Query: SWITCH? Returns current video switching mode in the format: =mode

S Example: SWITCH 0 (Turns vertical interval switching off.)

70 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide