3. Operation
Menu Structure
4.To “accept” the new IP address, press ESC at any time to exit the edit mode. The new IP address will take effect at this point.
póëíÉã=p~îÉ
From the System Menu, select System Save to save all settings except routing. When pressed, the menu briefly displays “Saving.”
póëíÉã=oÉÅ~ää
From the System Menu, select System Recall to recall all settings except routing. When pressed, the menu briefly displays “Recall.”
c~Åíçêó=oÉëÉí=jÉåì
From the Setup Menu, select Factory Reset to display the Factory Reset Menu.
FACTORY RESET
<SEL> = Yes
<ESC> = No
Figure 3-11. MatrixPRO Factory Reset Menu
The user must make a deliberate decision to perform a factory reset. When this function is performed, the following conditions will take effect:
•
•
All output channels will be blanked.
The serial communications protocol will be set to
•
•
•
•
The
All channels will have their reclocking circuits enabled. Vertical interval switching will be set to Enabled.
The IP address will be reset to the default value of 192.168.000.242.
MatrixPRO • 16x16 and 8x8 |
| 23 |
|