4. GUI Installation and Operation
GUI Operation
dêçìéáåÖ=q~Ä
Click the Grouping Tab on the MatrixPRO Control application. A sample tab is shown below:
Figure 4-7. Grouping Tab (sample)
The MatrixPRO routers can be set up to
SExample: Input channels 1, 2 and 3 are all
Establishing groups like these prevents an input from Group 2 from being accidentally switched to a Group 1 output. The type of route and the input source must still be established using the Video Switching page.
Use the following steps to establish a group:
1.Define the Group Number by selecting a Group index from the Groups column.
2.Select the output channels that will be associated with this Group (e.g., outputs 1, 2 and 3).
3.Select the input channels that will be associated with this Group (e.g., inputs 1, 2 and 3). As these keys are clicked, they will turn yellow.
40 |
| MatrixPRO • 16x16 and 8x8 |
|