Barco 16x16, HD/SD-SDI, 8x8 manual Mpqq, `ihbk=åìã=Éå, Obpbqjm=çé, Okls=, Omopq=åìã

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä

MatrixPRO Remote Commands

mpq^q

•Description: Displays preset information (i.e. preset valid, which input video/ audio # routed, audio level, etc).

•Parameters: out

Note

SExamples:

Preset number; [1 - 16]

This parameter is optional, if no parameter exist, all preset information (i.e., 1-16) will be displayed.

PSTAT 1 (Displays preset status for preset 1.)

PSTAT (Displays preset status for all presets.)

o`ihbk=åìã=Éå

•

•

Description: Enables and Disables Reclocker on Output Channel

Parameters:

num Input number; [1 - 16]

en Enable -[1]; Disable - [0]

•Query: RCLKEN? num; Returns the selected output's Reclocker Status: =en

S Example: RCLKEN 10 1 (Enables output 10 Reclocker)

obpbqjm=çé

•Description: Resets the system to factory defaults

•Parameters:

op Reset operation; [RF], RestartFactory

SExample: RESETMP F (Resets system to factory defaults and resets all user saved presets.)

okls=

•

Description: Recalls the system parameters from non-volatile RAM. The system parameters that are recalled include the current input and output routes, grouping information, I.P. settings and serial port configuration parameters. Upon power- up, the system configures itself according to these parameters.

•Parameters: None

omopq=åìã

•Description: Recall an existing preset from a preset location and update current front panel configuration/routing. If no preset information has been saved to the preset location, no changes are made.

•Parameters:

out Preset number to recall from; [1 - 16]

S Example: RPRST 1 (Recalls configuration from preset location 1.)

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 69