IBM 8490 manual Major components of the xSeries 206m Types 8485, Dimm

Major components of the xSeries 206m Types 8485 and 8490

Blue on a component indicates touch points, where you can grip the component to remove it from or install it in the server, open or close a latch, and so on.

Orange on a component or an orange label on or near a component indicates that the component can be hot-swapped, which means that if the server and operating system support hot-swap capability, you can remove or install the component while the server is running. (Orange can also indicate touch points on hot-swap components.) See the instructions for removing or installing a specific hot-swap component for any additional procedures that you might have to perform before you remove or install the component.

The following illustration shows the major components in the server.

Note: The illustrations in this document might differ slightly from your hardware.

	Fan
System board	DIMM	EMC shields
		Filler
Power supply		panels
		Upper
		bezel
		Lower
		bezel
	Heat sink	Drive cage
	Microprocessor
	Mini-PCI-X adapter	Front adapter-
		support bracket
	(SAS/SATA controller)
		SATA filler panel
	Cover	PCI-X expansion card
		SATA
		hard disk drive
		(some models)
		SAS filler panel
		Hot-swap
		hard disk drive
		(some models)

6xSeries 206m Types 8485 and 8490: Installation Guide