IBM 8485, 8490 manual Only Replace

Table 2. Abbreviated list of POST error codes (continued)

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
8603	Pointing-device error.	1. Reseat the pointing device.
		2.	Replace the following
			components one at a time, in
			the order shown, restarting the
			server each time:
			a.	Pointing device
			b.	(Trained service technician
				only) System board
00012000	Processor machine check error.	1.	(Trained service technician
			only) Reseat the
			microprocessor.
		2.	Replace the following
			components one at a time, in
			the order shown, restarting the
			server each time:
			a.	(Trained service technician
				only) Microprocessor
			b.	(Trained service technician
				only) System board
00019701	Microprocessor 1 failed the built-in	1.	(Trained service technician
	self-test (BIST).		only) Reseat the
			microprocessor.
		2.	Replace the following
			components one at a time, in
			the order shown, restarting the
			server each time:
			a.	(Trained service technician
				only) Microprocessor
			b.	(Trained service technician
				only) System board
01298001	No update data for microprocessor	1.	Update the BIOS code again
	1.		(see the Problem
			Determination and Service
			Guide on the IBM xSeries
			Documentation CD).
		2.	(Trained service technician
			only) Reseat the
			microprocessor.
		3.	(Trained service technician
			only) Replace the
			microprocessor.

60xSeries 206m Types 8485 and 8490: Installation Guide