IBM 8490, 8485 manual Removing the two-piece bezel

Removing the two-piece bezel

When working with some devices, such as drives in bays 1 through 7, you must first remove the two-piece bezel to access the devices.

Notes:

vBefore you remove the upper bezel, you must:

–Unlock and remove the side cover

–Remove the lower bezel

vIf you are removing only the lower bezel, you do not have to remove the side cover. However, the side cover must be unlocked.

To remove the two-piece bezel, complete the following steps:

1.Unlock the side cover.

2.Remove the side cover (see “Removing the side cover” on page 10).

3.Press the round blue release button on the right side of the lower bezel and tilt the lower bezel forward to disengage it from the chassis.

4.Lift the lower bezel to disengage the two bottom tabs from the chassis. Set the lower bezel aside.

Chapter 2. Installing options 11