SATO CL408-412e manual 13, Maintenance Mode

Unit 4: Printer Configuration

MAINTENANCE MODE

The Maintenance Mode permits counter reset of various printer components. Use the printer’s operator panel to select and enter the required options.

The printer has integrated counters to measure the accumilative activity of some features. The unit of measure is based on linear meters and includes a print head counter and a life counter. The head counter records the length of the media that has been printed since the print head was installed and should be reset each time the print head is replaced.

The life counter meaures the lenght of media the printer as a whole has printed. This counter would only be reset in case circuitry replacement.

The printer’s Counter Mode allows the operator to view the accumilated measurement and also allows the print head counter to be reset to zero.

Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.

DSW4: ON

LINE + FEED + POWER

No action, no change

MAINTENANCE MODE

DIPSW2-4 ON->OFF

LINE	FEED	No action,
		no change

Reset

DSW4: OFF

					FACTORY MODE
					LINE		FEED
							COUNTER CLEAR
		ALL CLEAR MODE						NONE
								ALL
								HEAD
		LINE		FEED				LINE	Scrolls
							FEED		options
		ALL CLEAR
		COUNTER	EEPROM				PRINT SIZE
Scrolls							SMALL	LARGE
		LINE
options									Scrolls
								LINE
							FEED		options
		Counter	EEPROM
		FEED		FEED
							TEST PRINT
							PRESS FEED KEY
COUNTER ALLCLEAR				EEPROM ALLCLEAR				LINE	No action,
YES	NO			YES	NO
							FEED		no change
LINE		Scrolls			LINE
		options					Printer
							performs
No		Yes		Yes		No	factory test
							print
FEED		FEED		FEED	FEED
COUNTER ALLCLEAR				EEPROM ALLCLEAR			Power printer
COMPLETED				COMPLETED
							off to exit

Figure 4-13, Maintenance Mode

CL408-412e Supplemental Manual 4-18 PN: 9001159A