Relocating the printer
Caution: Always follow these steps when moving the printer. You must always remove the toner cartridge when moving the printer. Failure to do so may cause permanent damage to the printer.
Steps:
1. Make sure that the power switch, located on the side of the printer, is in the OFF [
] position.
2.Disconnect the power cord from the wall outlet and the printer socket at the back
of the printer. In addition, you should disconnect the parallel cable connecting your printer to your computer.
3.Remove any printed material from the output tray.
4. Move the paper release lever to the release position (toward the front of the printer) and remove any paper from the upper paper tray.
5. Retract and close the output tray and |
| 3 |
retract and close the upper paper tray. | 4 | |
|
|
To close the trays, follow the steps
shown in the illustration at the right. | 2 |
|
1. Push in the output paper extender.
1
2. Fold up the output paper tray.
3.Close the paper support extenders.
4.Fold down the upper paper tray.
7