Star Micronics 4000 user manual Click on Display Print Status with your mouse

Selecting the Printer Status Display - PCL and PostScript modes

To setup the Star WinType 4000 Printer Status Display in the PCL and PostScript modes, and in the Windows Direct (GDI) mode when the WinType Print Manager is on, follow the Steps below.

Steps:

1.Open the Star WinType Tools group from the Program Manager by double-click- ing on the Star WinType Tools group window.

2.Double-click on the Star WinType Print Manager icon.

3.Click on the Options menu in the Star WinType Print Manager.

4.Click on Display Print Status with your mouse.

This will cause the Star WinType Printer Status Display to be displayed whenever you print, either directly from an application or when you print using the Star WinType Print Manager.

Caution: Do not select Display Print Status if you are printing from a DOS application in either PCL or PostScript modes.

5.You can also select from the Star WinType Print Manager whether to Beep When Print Job is Complete,

or to Beep on Printer Error by clicking on these selections with your mouse.

6.To exit the WinType Print Manager and save your settings, click on the Control- Menu box in the upper left hand corner of the window.

7.Click on Close.

59