6.Click on the Setup button. You will see a window which looks like the one on the right. In the Setup window, you can change the resolution, paper size, memory, orientation, number of copies and make any further adjustments you need through the Options button. For additional information on these features and advanced options, click on the Help button.
7.Click OK to exit the Setup window and to save your changes.
8.Click on Close to exit the Printers menu and to save your printer selection.
9.Click on Settings and select Exit to exit the Control Panel window.
10.Once you have selected this mode, and made any setting changes. You can print from your Windows application just as you would to any other printer.
Printing DOS applications in PCL mode under Windows
Steps:
1.If your default printer is already setup for either WinType 4000 GDI on WTGDI or WinType 4000 PCL on WTPCL, move to Step 3.
2.Follow steps
3.Launch your DOS application by using one of the following methods.
• DOS Prompt Method
1.
2.Begin the DOS application as normal according to your application's user manual.
37