Star Micronics 4000 user manual

3.Follow the instructions for setting up your default printer.

4.Select the HP LaserJet IIP driver in your DOS application. Refer to your DOS application's Users Manual for details on selecting a printer.

5.Select the command to print.

• .PIF File Method

1.Double-click on your .PIF DOS applica- tion icon. This icon was either created by you or supplied to you by your applica- tion program.

2.Follow steps 2 - 5 from the DOS prompt method described above.

Note: When you are finished with your DOS application, you must type Exit at the command line prompt (eg. C>) to return to Windows.

Note: The WinType 4000 is a Windows printer. The Window's Direct (GDI) mode is based on Windows 3.1 and will not work with MS-DOS. However, the WinType 4000 will work in PCL mode if you launch an MS-DOS application from within Windows.

The WinType 4000 will not run properly if you exit Windows completely.

38