Xantrex Technology ACCB-L-L1 manual 11ACCB-L Approved Internal Components

Installation

AC Bus Bar (for L1 HOT)

Xantrex P/N:

• ACBUSBAR)

Includes two 10x32 phillips screws and nuts, the bus bar and plastic stand-offs to isolate it from the chassis. Can be used for HOT (L1 or L2), and/or neutral connections.

Torque to 31 in-lb when installing.

Ground Bar

(factory-installed)

AC Bypass Switch Assembly (if not purchased at Xantrex)

Square D P/Ns:

• QOU160 (Single Breaker -

DIN Rail Mount)

•QOU260 (Dual Breaker - DIN Rail Mount)

•QOU2DTILA (Mechanical Interlock Attachment)

ILSCO P/Ns:

•SX-6 (x2) Service Crimps

AC Input/Output Terminals

Marathon P/Ns:

•1323572 (3 pole)

•1320572 (1 pole)

or equivalent

Figure 2-11ACCB-L Approved Internal Components

IMPORTANT: Always use approved wiring per NEC/CEC.

AC Bus Bar (for Neutral)

Xantrex P/N:

• ACBUSBAR

Includes two 10x34 phillips screws and nuts, the bus bar and plastic stand-offs to isolate it from the chassis. Can be used for HOT (L1 or L2), and/or neutral connections.

Torque to 31 in-lb when installing.

DIN Rail

(part of chassis - all models)

DIN Rail End Clamp

Square D P/N:

•999NT10 (10 pieces), or IDEC P/N :

•BNL5

Note: The ACCB-L comes with the Ground bar only. Some other mechanical components can be pur- chased from Xantrex (if part numbers were given above) or from the local electrical distributor.

2–16 973-0031-01-01 Rev A