Switch
RJ-45 Ports (Auto MDI/MDIX): 7x 10/100/1000 N-way auto-sensing for
10Base-T, 100Base-TX or 1000Base-T connections.
In general, MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX would allow connecting to another Switch or workstation without changing non-crossover or crossover cabling.
SFP/RJ-45 combo port: The system will automatically detect which is Giga UTP or Giga fiber. The Giga copper/Mini GBIC combo port is located on front panel which is named as port 1 with 8 10/100/1000Base-TX ports. Giga fiber is the mini GBIC slot that module is optional.
[NOTE] Disconnect the Giga copper connection before installing the Mini GBIC module. Otherwise, the switch couldn’t detect the Mini GBIC that has been installed. While Giga copper port or Mini GBIC port is operating, only one of them will operate.
Rear Panel
The 3-pronged power plug is located at the rear Panel of 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web-Smart Switch. The switch will work with AC voltage in the range of 100 to 240 volts / 50~60 Hz.
The Rear Panel of 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed
Switch
8
