Transition Networks MIL-SW8T1GPA manual About Web-based Management, System Login

Page 17

Web-Based Management

This section introduces the function configuration of the 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed Switch.

About Web-based Management

On the CPU board of the switch there is an embedded HTML web site residing in flash memory, which offers advanced management features and allow users to manage the switch from anywhere on the network through a standard browser such as Microsoft Internet Explorer.

The Web-Based Management supports Internet Explorer 5.0. And, it is applied with Java Applets for reducing network bandwidth consumption, enhance access speed and present an easy viewing screen.

[NOTE] By default, IE5.0 or later version does not allow Java Applets to activate sockets. In fact, the user has to explicitly modify the browser setting to enable Java Applets to operate network ports.

System Login

The default value is as below:

￿IP Address: 192.168.1.77

￿Subnet Mask: 255.255.255.0

￿Default Gateway: 192.168.1.254

￿Password: root

15

Image 17
Contents User Guide Five-Year Limited Warranty Content Technical Specification Introduction FeaturesFirmware update Software FeatureSystem default ManagementPackage Contents Page Front Panel Physical dimensionReset button Rear Panel Power LED IndicatorsStatus Color Description 1000MAttaching Rubber Pads Desktop InstallationPower On Page Small Workgroup Network ApplicationSegment Bridge Page About Web-based Management System LoginActive Gateway Current Gateway System ConfigurationActive IP Address Current IP Address System Configuration interface Port Configuration Statistics Overview Statistics Detail Vlan SettingVlan Port Setting Port Trunk Lacp Setting Lacp Status Spanning Tree Rstp System ConfigurationRstp Configuration interface Spanning Tree Status Rstp Port Configuration802.1X Configuration Parameters Configuration QoS Setting QoS Configuration interface QoS Dscp Mapping interface Firmware Upload Factory DefaultSystem Restart Configuration File Transfer Non-standard cables Faulty or loose cablesIncorrect connections Improper Network Topologies Diagnosing LED IndicatorsStandard LED IndicatorsProtocol TechnologyDimensions ConnectorPower Supply Power ConsumptionOperating Humidity Safety