Transition Networks MIL-SW8T1GPA manual System Configuration interface

Page 19

time the client/switch boots and the lease is 50% or more passed, the client/switch will attempt to renew the lease. At 87.5% of the lease completion, the client/switch will attempt to contact any DHCP server for a new lease

System Configuration interface

DHCP Enable: To enable DHCP Client Function

Fallback IP Address: Assigning the switch IP address(The default IP is 192.168.1.77)

Fallback Subnet Mask: Assigning the switch IP Subnet Mask

Fallback Gateway: Assigning the switch Gateway(The default value is 192.168.1.254)

Management VLAN: It is used for Remote Management Security; in fact, it can

17

Image 19

Contents User Guide Five-Year Limited Warranty Content Technical Specification Introduction FeaturesManagement Software FeatureFirmware update System defaultPackage Contents Page Reset button Physical dimensionFront Panel Rear Panel 1000M LED IndicatorsPower Status Color DescriptionPower On Desktop InstallationAttaching Rubber Pads Page Small Workgroup Network ApplicationSegment Bridge Page About Web-based Management System LoginActive IP Address Current IP Address System ConfigurationActive Gateway Current Gateway System Configuration interface Port Configuration Statistics Overview Statistics Detail Vlan SettingVlan Port Setting Port Trunk Lacp Setting Lacp Status Spanning Tree Rstp System ConfigurationRstp Configuration interface Spanning Tree Status Rstp Port Configuration802.1X Configuration Parameters Configuration QoS Setting QoS Configuration interface QoS Dscp Mapping interface System Restart Factory DefaultFirmware Upload Configuration File Transfer Incorrect connections Faulty or loose cablesNon-standard cables Improper Network Topologies Diagnosing LED IndicatorsTechnology LED IndicatorsStandard ProtocolPower Consumption ConnectorDimensions Power SupplyOperating Humidity Safety