Transition Networks MIL-SW8T1GPA manual Introduction, Features

Page 5

Introduction

The 8 10/100/1000T with 1 1000Base-X SFP/RJ45 Combo port Web Managed Switch that can be used to build high-performance switched workgroup networks. The switch is targeted at workgroup or department.

The 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed Switch features a Store-and-Forward Switching scheme that offers low latency for high-speed networking and allows the switch to auto-learn and store source address in a 8K-entry MAC address table.

The 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo Web Managed Switch has 8 auto-sensing 10/100/1000 Base-TX RJ-45 ports with one auto detect Giga SFP/RJ-45 Combo port that enables extended distance connection.

Features

￿Conform to IEEE 802.3, 802.3u, 802.3ab, 802.3x and 802.1x

￿Store-and-Forward switching architecture

￿True non-blocking switching

￿Web Management

￿Auto-MDIX on all ports

￿16Gbps back-plane

￿144Kbytes memory buffer

￿N-Way Auto-Negotiation

￿8K MAC address table

￿Back pressure with half duplex

￿Flow control with full duplex

￿Support Port Based VLAN

￿Support Port Trunk

3

Image 5
Contents User Guide Five-Year Limited Warranty Content Technical Specification Introduction FeaturesFirmware update Software FeatureSystem default ManagementPackage Contents Page Front Panel Physical dimensionReset button Rear Panel Power LED IndicatorsStatus Color Description 1000MAttaching Rubber Pads Desktop InstallationPower On Page Small Workgroup Network ApplicationSegment Bridge Page About Web-based Management System LoginActive Gateway Current Gateway System ConfigurationActive IP Address Current IP Address System Configuration interface Port Configuration Statistics Overview Statistics Detail Vlan SettingVlan Port Setting Port Trunk Lacp Setting Lacp Status Spanning Tree Rstp System ConfigurationRstp Configuration interface Spanning Tree Status Rstp Port Configuration802.1X Configuration Parameters Configuration QoS Setting QoS Configuration interface QoS Dscp Mapping interface Firmware Upload Factory DefaultSystem Restart Configuration File Transfer Non-standard cables Faulty or loose cablesIncorrect connections Improper Network Topologies Diagnosing LED IndicatorsStandard LED IndicatorsProtocol TechnologyDimensions ConnectorPower Supply Power ConsumptionOperating Humidity Safety