802.1X Configuration

RSTP Status interface

802.1x is an IEEE authentication specification that allows a client to connect to a wireless access point or wired switch but prevents the client from gaining access to the Internet until it provides credentials, like a user name and password that are verified by a separate server.

Mode: To disable or enable 802.1x protocol

RADIUS IP: Set the Radius Server IP address

RADIUS UDP Port: Set the UDP destination port for authentication requests to the specified Radius Server

RADIUS Secret: Set an encryption key for use during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server

Admin State: Select the state of port

Force Authorized: The specified port is required to be held in the unauthorized state

Force Unauthorized: The specified port is required to be held in the authorized state

Auto: The specified port is set to the authorized or unauthorized state in accordance with the outcome of an authentication exchange between the Supplicant and the authentication server

Re-authenticate:Restart authentication process for the port

Force Reinitialize: Restart a complete authentication process for the port

Statistics: Click to view each port statistic

Re-authenticate All: Restart authentication process for all the port

Force reinitialize All: Restart a complete authentication process for the port

And then, click

Apply

to apply the configuration