Teac X-01 D2 owner manual Layer priority playback area, Link, Sacd, Pcm, Off

Page 18

Setting the Word sync, DAC, priority playback area, and i.LINK output (2)

LAYER (priority playback area)

There are two types of Super Audio CDs, regular ones that contain 2-channel stereo and multi-channel stereo, and hybrid discs (two-layer discs) that contain Super Audio CD and regular CD data.

This setting allows you to determine which layer will be first selected for playback (the priority playback layer) with a hybrid Super Audio CD.

SACD

This mode gives priority to the Super Audio CD layer.

The 2-channel layer is played when the Analog Out is set to “2ch”. The multi-channel layer is played when the Analog Out is set to “Multi ch”.

CD

This mode gives priority to the CD layer.

<Selecting a layer that is not on the disc results in playback of the alternative layer that is found on the disc.

<A change of playback layer using the PLAY AREA button is overridden by the LAYER setting when a different disc is loaded.

i.LINK

Used to select an i.LINK output setting.

When using the i.LINK terminal, select “60958” or “PCM”, and set the Digital Out to “ON”.

60958

DSD signal is output during playback of a Super Audio CD. The digital signal in IEC60958 format is output during playback of a CD.

PCM

DSD signal is output during playback of a Super Audio CD. Linear PCM digital signal is output during playback of a CD.

<Some amplifiers may regard this signal as DVD-Audio.

OFF

Select this when you don’t use the i.LINK (AUDIO) terminal. No signal is output from the i.LINK (AUDIO) terminal.

<There is no difference between 60958 and PCM as far as Super Audio CD playback is concerned.

<Set the Analog Out setting to “Multi ch” to output the surround sound from a Super Audio CD.

When the Analog Out is set to “2ch”, the multi-channel sound is down mixed to 2 channels.

<In case you experience any problem with the audio output, read the instructions of the connected component to check the adaptable format.

<If the component connected via the i.LINK terminal is compatible with the flow rate control, the connected component will work in the flow rate control mode.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 01 D2 Important Safety Instructions For U.S.AContents Features Before Use Discs Type of Discs That Can be Played on This SystemFollowing discs cannot be played with this unit Remote Control Unit Restoring factory settingsHow to insert the batteries Connection Power cord receptacle Word sync connectorSignal GND connection Analog audio output terminalsFront panel features Front PanelDisplay Understanding the remote control unit Stopping playback Pausing playbackPlayback Opening and closing the trayFast scanning Skipping playbackSelecting a track Selecting the playback areaAdding tracks to the list Programmed playbackClearing the last track from the list Clearing the whole programTrack repeat Repeat modeDisplay dimming Disc repeatChanging the display mode Word DAC LayerWord Word sync DAC D/A converterDSD Sacd Layer priority playback areaLink PCMSettings introduction Exit the setup menu by pressing Setup once moreUse the cursor buttons to navigate the menus Settings Setup Menu Chart Digital output DigitalOut Settings Audio SetupAnalog output Analog Out CD DirectSmall Speaker Size SP SizeLarge On subwoofer onlySpeaker levels SP Level This setup is effective in the following case onlySpeaker distance Distance Test tone length Test toneCopyright protection system Dtcp How to connect multiple i.LINK-capable devicesLink Ieee Data transfer rateTroubleshooting UnlckSpecifications Sommaire Pour l’EuropeMise au rebut de votre ancien appareil Caractéristiques Moteur sans noyau avec aimants néodymeAvant utilisation CD audio DisquesTypes de disques lisibles par ce système Propos des CD-R/CD-RWRestauration des réglages d’usine TélécommandeRemplacement des piles Comment insérer les pilesConnexions Prises de sortie audio numérique Connexion Signal GNDPrises de sortie audio analogique Prise i.LINK AudioDescription de la face avant Face avantAfficheur Comprendre la télécommande Touches curseur et EnterPavé numérique Arrêt de la lecture LectureMise en pause de la lecture Ouverture et fermeture du tiroirRecherche rapide Saut de lectureSélection d’une plage Sélection de la zone de lectureAjout de plages à la liste Lecture programméeEffacement de la dernière plage de la liste Effacement de toute la programmationPlage en boucle Mode Repeat lecture en boucleAtténuation de l’afficheur Disque en boucleChangement du mode d’affichage REF. Référence Word Synchro WordDAC Convertisseur N/A Bit MultibitLayer zone à lecture prioritaire Encore sur Setup Réglages introductionUtilisez les touches curseur pour naviguer dans les menus Réglages Tableau du menu de configuration Réglages Configuration audio Sortie analogique Analog OutSortie numérique DigitalOut Taille d’enceinte SP Size On caisson de graves seulementDurée de la tonalité de test Test tone Distance des enceintes DistanceNiveaux des enceintes SP Level Sélectionnez « Test Start » et appuyez sur la toucheComment connecter plusieurs appareils compatibles i.LINK Système de protection de droits d’auteurTaux de transfert des données Connexion en guirlandeGuide de dépannage UNLCK! »Spécifications Inhalt Ausstattungsmerkmale Kernloser Motor mit Neodym-MagnetenStabiles Chassis mit drei punktgelagerten Standfüßen Unübertroffene Ausstattungsmerkmale Audio-DACsWord Clock Synchronisation Hinweise zur Verwendung dieser Bedienungsanleitung Vor der ersten InbetriebnahmeLieferumfang Vor der ersten InbetriebnahmeAufstellen des X-01 D2 AchtungAchtung Zur Wiedergabe mit dem X-01 D2 geeignete Disc-FormateAllgemeines zu CD-R/CD-RWs WarnungAnfassen einer Disc Anschlüsse Digitale Audioausgänge Signal GND SignalmasseanschlussAnaloge Audioausgänge LINK-Schnittstelle AudioBatteriewechsel FernbedienungEinsetzen von Batterien Vorsichtsmaßnahmen im Umgang mit BatterienFernbedienungssensor Bedienelemente auf der GerätevorderseiteDAC-Anzeige Display Disc-Schublade und VerschlussPlay Area Wiedergabebereich Verwenden der FernbedienungZifferntasten Cursor-Tasten und EnterDisplay Beenden der Wiedergabe WiedergabeUnterbrechen der Wiedergabe Pause Öffnen und Schließen der Disc-SchubladeVerwenden der SKIP-Tasten Auswählen eines MusiktitelsSchneller Suchlauf Titel zu einer Liste hinzufügen Wiedergabe einer programmierten TitelfolgeLöschen des letzten Titels einer Liste Löschen einer kompletten TitelfolgeWiedergabewiederholung von Musiktiteln WiedergabewiederholungEinstellen der Display-Helligkeit Wiedergabewiederholung aller TitelÄndern der Displayanzeige NormalanzeigeDAC D/A-Wandler REF. ReferenzBit 1-Bit Layer bevorzugter Wiedergabebereich Einstellungen Einleitung Einstellungen Setup-Menü-Diagramm Einstellungen Audio Setup Analogausgang Analog OutDigitalausgang DigitalOut Small klein Abmessungen der Lautsprecherboxen SP SizeLarge groß On nur SubwooferDauer des Testtonsignals Test tone Abstand der Lautsprechersysteme zur Hörposition DistanceLautsprecher-Wiedergabepegel SP Level Anschließen mehrerer i.LINK-kompatibler Komponenten Kopierschutzsystem DtcpDatenübertragungsrate HinweiseTechnische Daten Hilfe bei Funktionsstörungen Vermeiden Sie Kondensationsbildung Pflege und WartungTeac Esoteric Company

X-01 D2 specifications

The Teac X-01 D2 is a premier audio component that has garnered attention among audiophiles and music enthusiasts. Designed with a keen focus on sound quality and advanced technology, it is celebrated for its exceptional playback capabilities and versatile features.

At its core, the Teac X-01 D2 is a high-end CD player that seamlessly combines modern digital advancements with classic analog design principles. It features a high-precision, slot-loading disc mechanism that not only enhances the convenience of use but also contributes to minimized vibrations during playback. This ensures that the audio signal remains clean and unaffected, resulting in superior sound quality.

One of the standout features of the X-01 D2 is its Dual-DAC architecture, utilizing two high-performance Digital-to-Analog Converters. This design allows for greater detail and dynamic range in audio playback, providing listeners with a rich and immersive experience. The unit supports various audio formats, including standard CDs, as well as high-resolution audio files, ensuring that users can enjoy their music in the utmost fidelity.

The incorporation of TEAC's proprietary technologies also elevates the performance of the X-01 D2. The Ultra-Linear Circuitry minimizes noise and distortion, while the high-quality, low-jitter clock circuitry ensures accurate signal processing. As a result, the audio produced is remarkably clear and precise, showcasing the nuances in even the most complex musical pieces.

Additionally, the Teac X-01 D2 includes multiple digital outputs, allowing users the flexibility to connect to a range of audio systems. These outputs include AES/EBU, coaxial, and optical connections, making it compatible with various audio equipment. The unit also features an analog output, providing connection options for those who prefer a classic analog connection to their amplifiers.

User-friendly controls and an intuitive interface further enhance the overall experience with the X-01 D2. Users can easily navigate through their music collection, adjusting settings and playback modes with ease. Its sleek design, complemented by a high-quality build, ensures that it fits seamlessly into any audio setup, both aesthetically and functionally.

In summary, the Teac X-01 D2 stands as a testament to the brand's commitment to quality and innovation. With its advanced technologies and features, it delivers an unparalleled listening experience that is sure to satisfy even the most discerning audio enthusiasts.
Top Page Image Contents