Teac X-01 D2 owner manual Type of Discs That Can be Played on This System

Page 6

Discs

Type of Discs That Can be Played on This System

This player can playback discs bearing any of the following logos:

Audio CD:

• 12cm or 8cm discs

• Linear PCM digital audio Audio CDs are divided into tracks.

Super Audio CD:

• Single layer, dual layer or Hybrid layer

• 12cm or 8cm discs

• Digital audio (DSD)

Super Audio CDs are divided into tracks.

About CD-R/CD-RW

CD-R/RW discs recorded in Audio CD format and finalized correctly are playable. But depending on the quality of the disc and/or the condition of the recording, some CD-R & CD- RW discs may not be playable.

Caution:

<If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

<Unfinalized CD-R/CD-RW discs cannot be played.

Following discs cannot be played with this unit:

DVD, CD-G, Data part of CD-EXTRA, PHOTO CD, CD-ROM and DVD-ROM discs

discs recorded in a color system other than PAL or NTSC

illegally produced discs

scratched discs

discs that are dusty, soiled or marked with fingerprints

Warning:

If you attempt to play back such discs, there is a risk that a sudden and loud noise may be heard over the speakers at full volume and cause damage to the speakers and to your hearing.

Copy-protected discs, DualDiscs and other discs that do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC ESOTERIC COMPANY cannot be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact the producer of the disc.

<Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.)

<To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

How to remove the disc

How to hold the disc

<Should the disc become dirty, wipe the surface from the center hole outward towards the outer edge with a soft, dry, lint-free cloth:

<Never use chemicals such as record (LP) sprays, antistatic sprays or fluids, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface.

<Discs should be returned to their cases after each use to avoid dust and scratches that may eventually cause your disc to skip.

<Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Long exposure to high temperatures will warp the disc.

<Do not play any disc that is warped, scratched, deformed or damaged. Playing such discs may cause irreparable harm to the playback mechanism.

<CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location with direct sunlight and keep your discs away from sources of heat such as radiators or heat-generating electrical devices.

<Printable discs aren’t recommended because the label side might be sticky (or contain glue), which will damage the unit.

<Do not stick papers or protective sheets on the discs and do not use any protective coating spray.

<Use a soft oil-based felt-tipped pen to write information on the label side of a disc. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side of the disc.

<Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction.

<Do not use irregular shape discs (octagonal, heart shaped, business card size, etc.). Discs of this sort can damage the unit:

<If you are in any doubt as to the care and handling of any disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

6

Image 6
Contents 01 D2 Important Safety Instructions For U.S.AContents Features Before Use Discs Type of Discs That Can be Played on This SystemFollowing discs cannot be played with this unit Remote Control Unit Restoring factory settingsHow to insert the batteries Connection Power cord receptacle Word sync connectorSignal GND connection Analog audio output terminalsFront panel features Front PanelDisplay Understanding the remote control unit Stopping playback Pausing playbackPlayback Opening and closing the trayFast scanning Skipping playbackSelecting a track Selecting the playback areaAdding tracks to the list Programmed playbackClearing the last track from the list Clearing the whole programTrack repeat Repeat modeDisplay dimming Disc repeatChanging the display mode Word DAC LayerWord Word sync DAC D/A converterDSD Sacd Layer priority playback areaLink PCMSettings introduction Exit the setup menu by pressing Setup once moreUse the cursor buttons to navigate the menus Settings Setup Menu Chart Digital output DigitalOut Settings Audio SetupAnalog output Analog Out CD DirectSmall Speaker Size SP SizeLarge On subwoofer onlySpeaker levels SP Level This setup is effective in the following case onlySpeaker distance Distance Test tone length Test toneCopyright protection system Dtcp How to connect multiple i.LINK-capable devicesLink Ieee Data transfer rateTroubleshooting UnlckSpecifications Sommaire Pour l’EuropeMise au rebut de votre ancien appareil Caractéristiques Moteur sans noyau avec aimants néodymeAvant utilisation CD audio DisquesTypes de disques lisibles par ce système Propos des CD-R/CD-RWRestauration des réglages d’usine TélécommandeRemplacement des piles Comment insérer les pilesConnexions Prises de sortie audio numérique Connexion Signal GNDPrises de sortie audio analogique Prise i.LINK AudioDescription de la face avant Face avantAfficheur Comprendre la télécommande Touches curseur et EnterPavé numérique Arrêt de la lecture LectureMise en pause de la lecture Ouverture et fermeture du tiroirRecherche rapide Saut de lectureSélection d’une plage Sélection de la zone de lectureAjout de plages à la liste Lecture programméeEffacement de la dernière plage de la liste Effacement de toute la programmationPlage en boucle Mode Repeat lecture en boucleAtténuation de l’afficheur Disque en boucleChangement du mode d’affichage REF. Référence Word Synchro WordDAC Convertisseur N/A Bit MultibitLayer zone à lecture prioritaire Encore sur Setup Réglages introductionUtilisez les touches curseur pour naviguer dans les menus Réglages Tableau du menu de configuration Réglages Configuration audio Sortie analogique Analog OutSortie numérique DigitalOut Taille d’enceinte SP Size On caisson de graves seulementDurée de la tonalité de test Test tone Distance des enceintes DistanceNiveaux des enceintes SP Level Sélectionnez « Test Start » et appuyez sur la toucheComment connecter plusieurs appareils compatibles i.LINK Système de protection de droits d’auteurTaux de transfert des données Connexion en guirlandeGuide de dépannage UNLCK! »Spécifications Inhalt Ausstattungsmerkmale Kernloser Motor mit Neodym-MagnetenStabiles Chassis mit drei punktgelagerten Standfüßen Unübertroffene Ausstattungsmerkmale Audio-DACsWord Clock Synchronisation Hinweise zur Verwendung dieser Bedienungsanleitung Vor der ersten InbetriebnahmeLieferumfang Vor der ersten InbetriebnahmeAufstellen des X-01 D2 AchtungAchtung Zur Wiedergabe mit dem X-01 D2 geeignete Disc-FormateAllgemeines zu CD-R/CD-RWs WarnungAnfassen einer Disc Anschlüsse Digitale Audioausgänge Signal GND SignalmasseanschlussAnaloge Audioausgänge LINK-Schnittstelle AudioBatteriewechsel FernbedienungEinsetzen von Batterien Vorsichtsmaßnahmen im Umgang mit BatterienFernbedienungssensor Bedienelemente auf der GerätevorderseiteDAC-Anzeige Display Disc-Schublade und VerschlussPlay Area Wiedergabebereich Verwenden der FernbedienungZifferntasten Cursor-Tasten und EnterDisplay Beenden der Wiedergabe WiedergabeUnterbrechen der Wiedergabe Pause Öffnen und Schließen der Disc-SchubladeVerwenden der SKIP-Tasten Auswählen eines MusiktitelsSchneller Suchlauf Titel zu einer Liste hinzufügen Wiedergabe einer programmierten TitelfolgeLöschen des letzten Titels einer Liste Löschen einer kompletten TitelfolgeWiedergabewiederholung von Musiktiteln WiedergabewiederholungEinstellen der Display-Helligkeit Wiedergabewiederholung aller TitelÄndern der Displayanzeige NormalanzeigeDAC D/A-Wandler REF. ReferenzBit 1-Bit Layer bevorzugter Wiedergabebereich Einstellungen Einleitung Einstellungen Setup-Menü-Diagramm Einstellungen Audio Setup Analogausgang Analog OutDigitalausgang DigitalOut Small klein Abmessungen der Lautsprecherboxen SP SizeLarge groß On nur SubwooferDauer des Testtonsignals Test tone Abstand der Lautsprechersysteme zur Hörposition DistanceLautsprecher-Wiedergabepegel SP Level Anschließen mehrerer i.LINK-kompatibler Komponenten Kopierschutzsystem DtcpDatenübertragungsrate HinweiseTechnische Daten Hilfe bei Funktionsstörungen Vermeiden Sie Kondensationsbildung Pflege und WartungTeac Esoteric Company

X-01 D2 specifications

The Teac X-01 D2 is a premier audio component that has garnered attention among audiophiles and music enthusiasts. Designed with a keen focus on sound quality and advanced technology, it is celebrated for its exceptional playback capabilities and versatile features.

At its core, the Teac X-01 D2 is a high-end CD player that seamlessly combines modern digital advancements with classic analog design principles. It features a high-precision, slot-loading disc mechanism that not only enhances the convenience of use but also contributes to minimized vibrations during playback. This ensures that the audio signal remains clean and unaffected, resulting in superior sound quality.

One of the standout features of the X-01 D2 is its Dual-DAC architecture, utilizing two high-performance Digital-to-Analog Converters. This design allows for greater detail and dynamic range in audio playback, providing listeners with a rich and immersive experience. The unit supports various audio formats, including standard CDs, as well as high-resolution audio files, ensuring that users can enjoy their music in the utmost fidelity.

The incorporation of TEAC's proprietary technologies also elevates the performance of the X-01 D2. The Ultra-Linear Circuitry minimizes noise and distortion, while the high-quality, low-jitter clock circuitry ensures accurate signal processing. As a result, the audio produced is remarkably clear and precise, showcasing the nuances in even the most complex musical pieces.

Additionally, the Teac X-01 D2 includes multiple digital outputs, allowing users the flexibility to connect to a range of audio systems. These outputs include AES/EBU, coaxial, and optical connections, making it compatible with various audio equipment. The unit also features an analog output, providing connection options for those who prefer a classic analog connection to their amplifiers.

User-friendly controls and an intuitive interface further enhance the overall experience with the X-01 D2. Users can easily navigate through their music collection, adjusting settings and playback modes with ease. Its sleek design, complemented by a high-quality build, ensures that it fits seamlessly into any audio setup, both aesthetically and functionally.

In summary, the Teac X-01 D2 stands as a testament to the brand's commitment to quality and innovation. With its advanced technologies and features, it delivers an unparalleled listening experience that is sure to satisfy even the most discerning audio enthusiasts.