Teac X-01 D2 Settings Audio Setup, Analog output Analog Out, Digital output DigitalOut, CD Direct

Page 21

Settings (Audio Setup)

Analog output (Analog Out)

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

2ch

Outputs 2-channel audio from the the i.LINK (AUDIO) and the 2ch analog audio output terminals (FRONT L and R).

If multi-channel program material is played, the multi-channel material will be down mixed to two channels, and the DOWN MIX indicator lights on the display.

Multi ch

The unit outputs the multi-channel surround sound.

Select this when the i.LINK (AUDIO) terminal or the 5.1ch analog audio output terminals are connected to a surround sound amplifier.

<5.1CH indicator lights when “Multi ch” is selected.

<Note that if “Multi ch” is selected, only the front L/R sound of the multi-channel material will be output from the FRONT L and R terminals.

<Note that the audio volume changes when the mode is changed between 2-channel to multi-channel.

<Speakers should be set up properly for multi-channel use. See page 22 for details.

<You can also use the 2CH/MULTI button of the remote control unit to select either “2ch” or “Multi ch”.

When playback is stopped, press the 2CH/MULTI button.

Digital output (DigitalOut)

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

ON

Audio is output from the i.LINK (AUDIO) terminal and the DIGITAL OUT terminals.

OFF

Audio is not output from the i.LINK (AUDIO) terminal and the DIGITAL OUT terminals. If you are not using these terminals, we suggest that you use this OFF setting for better analog sound.

<

Digital sound from Super Audio CDs cannot be output from

ENGLISH

 

 

the DIGITAL OUT terminals.

 

CD Direct

When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry.

Direct

Speaker setting is bypassed.

Normal

The speaker setting you have made is used.

Select this setting when the i.LINK (AUDIO) terminal or the 5.1ch analog audio output terminals are connected to a surround sound amplifier.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 01 D2 For U.S.A Important Safety InstructionsContents Features Before Use Discs Type of Discs That Can be Played on This SystemFollowing discs cannot be played with this unit Remote Control Unit Restoring factory settingsHow to insert the batteries Connection Signal GND connection Word sync connectorPower cord receptacle Analog audio output terminalsFront panel features Front PanelDisplay Understanding the remote control unit Playback Pausing playbackStopping playback Opening and closing the traySelecting a track Skipping playbackFast scanning Selecting the playback areaClearing the last track from the list Programmed playbackAdding tracks to the list Clearing the whole programDisplay dimming Repeat modeTrack repeat Disc repeatWord DAC Layer Changing the display modeWord Word sync DAC D/A converterDSD Link Layer priority playback areaSacd PCMSettings introduction Exit the setup menu by pressing Setup once moreUse the cursor buttons to navigate the menus Settings Setup Menu Chart Analog output Analog Out Settings Audio SetupDigital output DigitalOut CD DirectLarge Speaker Size SP SizeSmall On subwoofer onlySpeaker distance Distance This setup is effective in the following case onlySpeaker levels SP Level Test tone length Test toneLink Ieee How to connect multiple i.LINK-capable devicesCopyright protection system Dtcp Data transfer rateUnlck TroubleshootingSpecifications Sommaire Pour l’EuropeMise au rebut de votre ancien appareil Moteur sans noyau avec aimants néodyme CaractéristiquesAvant utilisation Types de disques lisibles par ce système DisquesCD audio Propos des CD-R/CD-RWRemplacement des piles TélécommandeRestauration des réglages d’usine Comment insérer les pilesConnexions Prises de sortie audio analogique Connexion Signal GNDPrises de sortie audio numérique Prise i.LINK AudioDescription de la face avant Face avantAfficheur Comprendre la télécommande Touches curseur et EnterPavé numérique Mise en pause de la lecture LectureArrêt de la lecture Ouverture et fermeture du tiroirSélection d’une plage Saut de lectureRecherche rapide Sélection de la zone de lectureEffacement de la dernière plage de la liste Lecture programméeAjout de plages à la liste Effacement de toute la programmationAtténuation de l’afficheur Mode Repeat lecture en bouclePlage en boucle Disque en boucleChangement du mode d’affichage DAC Convertisseur N/A Word Synchro WordREF. Référence Bit MultibitLayer zone à lecture prioritaire Encore sur Setup Réglages introductionUtilisez les touches curseur pour naviguer dans les menus Réglages Tableau du menu de configuration Réglages Configuration audio Sortie analogique Analog OutSortie numérique DigitalOut On caisson de graves seulement Taille d’enceinte SP SizeNiveaux des enceintes SP Level Distance des enceintes DistanceDurée de la tonalité de test Test tone Sélectionnez « Test Start » et appuyez sur la toucheTaux de transfert des données Système de protection de droits d’auteurComment connecter plusieurs appareils compatibles i.LINK Connexion en guirlandeUNLCK! » Guide de dépannageSpécifications Inhalt Ausstattungsmerkmale Kernloser Motor mit Neodym-MagnetenStabiles Chassis mit drei punktgelagerten Standfüßen Unübertroffene Ausstattungsmerkmale Audio-DACsWord Clock Synchronisation Lieferumfang Vor der ersten InbetriebnahmeHinweise zur Verwendung dieser Bedienungsanleitung Vor der ersten InbetriebnahmeAchtung Aufstellen des X-01 D2Allgemeines zu CD-R/CD-RWs Zur Wiedergabe mit dem X-01 D2 geeignete Disc-FormateAchtung WarnungAnfassen einer Disc Anschlüsse Analoge Audioausgänge Signal GND SignalmasseanschlussDigitale Audioausgänge LINK-Schnittstelle AudioEinsetzen von Batterien FernbedienungBatteriewechsel Vorsichtsmaßnahmen im Umgang mit BatterienDAC-Anzeige Bedienelemente auf der GerätevorderseiteFernbedienungssensor Display Disc-Schublade und VerschlussZifferntasten Verwenden der FernbedienungPlay Area Wiedergabebereich Cursor-Tasten und EnterDisplay Unterbrechen der Wiedergabe Pause WiedergabeBeenden der Wiedergabe Öffnen und Schließen der Disc-SchubladeVerwenden der SKIP-Tasten Auswählen eines MusiktitelsSchneller Suchlauf Löschen des letzten Titels einer Liste Wiedergabe einer programmierten TitelfolgeTitel zu einer Liste hinzufügen Löschen einer kompletten TitelfolgeEinstellen der Display-Helligkeit WiedergabewiederholungWiedergabewiederholung von Musiktiteln Wiedergabewiederholung aller TitelNormalanzeige Ändern der DisplayanzeigeDAC D/A-Wandler REF. ReferenzBit 1-Bit Layer bevorzugter Wiedergabebereich Einstellungen Einleitung Einstellungen Setup-Menü-Diagramm Einstellungen Audio Setup Analogausgang Analog OutDigitalausgang DigitalOut Large groß Abmessungen der Lautsprecherboxen SP SizeSmall klein On nur SubwooferDauer des Testtonsignals Test tone Abstand der Lautsprechersysteme zur Hörposition DistanceLautsprecher-Wiedergabepegel SP Level Datenübertragungsrate Kopierschutzsystem DtcpAnschließen mehrerer i.LINK-kompatibler Komponenten HinweiseTechnische Daten Hilfe bei Funktionsstörungen Pflege und Wartung Vermeiden Sie KondensationsbildungTeac Esoteric Company

X-01 D2 specifications

The Teac X-01 D2 is a premier audio component that has garnered attention among audiophiles and music enthusiasts. Designed with a keen focus on sound quality and advanced technology, it is celebrated for its exceptional playback capabilities and versatile features.

At its core, the Teac X-01 D2 is a high-end CD player that seamlessly combines modern digital advancements with classic analog design principles. It features a high-precision, slot-loading disc mechanism that not only enhances the convenience of use but also contributes to minimized vibrations during playback. This ensures that the audio signal remains clean and unaffected, resulting in superior sound quality.

One of the standout features of the X-01 D2 is its Dual-DAC architecture, utilizing two high-performance Digital-to-Analog Converters. This design allows for greater detail and dynamic range in audio playback, providing listeners with a rich and immersive experience. The unit supports various audio formats, including standard CDs, as well as high-resolution audio files, ensuring that users can enjoy their music in the utmost fidelity.

The incorporation of TEAC's proprietary technologies also elevates the performance of the X-01 D2. The Ultra-Linear Circuitry minimizes noise and distortion, while the high-quality, low-jitter clock circuitry ensures accurate signal processing. As a result, the audio produced is remarkably clear and precise, showcasing the nuances in even the most complex musical pieces.

Additionally, the Teac X-01 D2 includes multiple digital outputs, allowing users the flexibility to connect to a range of audio systems. These outputs include AES/EBU, coaxial, and optical connections, making it compatible with various audio equipment. The unit also features an analog output, providing connection options for those who prefer a classic analog connection to their amplifiers.

User-friendly controls and an intuitive interface further enhance the overall experience with the X-01 D2. Users can easily navigate through their music collection, adjusting settings and playback modes with ease. Its sleek design, complemented by a high-quality build, ensures that it fits seamlessly into any audio setup, both aesthetically and functionally.

In summary, the Teac X-01 D2 stands as a testament to the brand's commitment to quality and innovation. With its advanced technologies and features, it delivers an unparalleled listening experience that is sure to satisfy even the most discerning audio enthusiasts.
Top Page Image Contents