Fujitsu D2630 technical manual Returning batteries, Local contacts

Page 13

Important notes

Environment Protection

Returning batteries

Batteries which are marked with one of the following symbols may not be disposed of together with household refuse according to the applicable EU directive.

Figure 3: Symbols for batteries

With batteries containing harmful substances, the chemical symbol for the heavy metal contained is indicated below the waste bin.

Cd Cadmium

Hg Mercury

Pb Lead

The following applies to Germany:

Private consumers can return batteries at the point of sale or the immediate vicinity thereof free of charge (exception: starter batteries).

The final consumer is obligated to return defective or used batteries to the seller or to the return points established for this purpose.

Local contacts

For details on take-back and reuse of devices and consumables within Europe, contact your Fujitsu Siemens Computers branch office/subsidiary or our recycling center in Paderborn:

Fujitsu Siemens Computers

Recycling Center

D-33106 Paderborn

Germany

Tel. +49 5251 8 18010

Fax +49 5251 8 18015

Internet: www.fujitsu-siemens.com/recycling

D2630 (RX600 S3) SAS

9

Image 13
Contents System Board D2630 for RX600 S3 SAS Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…Contents Page Notational conventions IntroductionPage Important notes Batteries ESD label CE Certificate CE CertificateImportant notes Environment ProtectionEnvironmentally-friendly product design and development Environment Protection Symbols for electrical electronic devicesLocal contacts Returning batteriesPage Overview FeaturesSystem board Bios features External connectorsOverview Main memoryEnvironmental protection FeaturesForm factor Memory board population Main memoryPCI bus PCI busPCI slots Assignment of the PCI interruptsTemperature / system monitoring Screen resolutionScreen resolution Temperature monitoringFan control Fan monitoringSensor monitoring Voltage monitoringConnectors and jumpers Connectors and jumpersJ4A1 26 Password Clear Settings with jumpersJ4A2 27 Bios Write Protect J4A3 28 Bios RecoveryLAN connectors J8C2 1 BMC ResetJ4A4 29 Nvram Clear RoMB RoMBReplacing the RAID Controller Replacing the RAID ControllerUnpack the controller Review the Jumpers and ConnectorsPrepare the Computer Jum Type Description Pers Remove the RAID SAS controller from the Mainboard LEDInstalling the new RAID SAS controller Run the WebBIOS Configuration Utility Power-Up the ComputerInstall the Operating System Driver Page Replacing the lithium battery holder is similar Replacing the lithium batteryPage Abbreviations Abbreviations Evrd LED RoHS RAIDWOL WfMComments Suggestions Corrections