Fujitsu D2630 Settings with jumpers, J4A1 26 Password Clear, J4A2 27 Bios Write Protect

Features				Connectors and jumpers
23	= IPMI connector	29	= J4A4 (jumper)
24	= GCM connector (not used)	30	= LAN 1	(top)
25	= RAID Activation Key (RoMB)	31	= LAN 2	(bottom)
26	= J4A1 (jumper)	32	= Dual USB connector
27	= J4A2 (jumper)	33	= Serial connector (top)
28	= J4A3 (jumper)	34	= Video connector (bottom)

Settings with jumpers

The system board is supplied with all jumpers set on the following positions.

13

J4A1 = Password Clear

J4A2 = BIOS Write Protect

J4A3 = BIOS Recovery

J4A4 = NVRAM Clear

J8C2 = BMC Reset

Figure 7: Jumper default settings

J4A1 (26) - Password Clear

1-2 Password enabled

2-3 Password disabled/cleared

J4A2 (27) - BIOS Write Protect

1-2 BIOS unprotected

2-3 BIOS write protected

J4A3 (28) - BIOS Recovery

1-2 Normal boot

2-3 BIOS recovery

D2630 (RX600 S3) SAS 19