Fujitsu D2630 technical manual Introduction, Notational conventions

1 Introduction

This technical manual describes the system board D2630, which can be equipped with up to four Intel® processors.

Further information about drivers is provided in the readme files on the supplied ServerSupport or ServerStart CDs.

You will find further information in the manual "D2630 Setup Utility".

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

italics	indicates commands, menu items, file and path
	names or software programs
fixed font	indicates system output on the monitor
semi-bold fixed	indicates values to be entered through the keyboard
font
[Key symbol]	indicates keys according to their representation on the
	keyboard
	If capital letters are to be entered explicitly, then the
	Shift key is shown, e.g. [SHIFT] - [A] for A.
	If two keys need to be pressed at the same time, then
	this is shown by placing a hyphen between the two key
	symbols.
“quotation marks”	indicates names and terms that are being empha-
	sized.
Ê	indicates an operation that to be performed

VCAUTION! indicates warnings, which, if ignored, will endanger your health, destroy the system or lead to the loss of data.

I indicates additional information, notes and tips

Table 1: Notational conventions

D2630 (RX600 S3) SAS 1