Features | Temperature / system monitoring |
Fan monitoring
Fans that are no longer available, blocked or sticky fans are detected.
Fan control
The fans are regulated according to temperature. Maximum speed if the housing cover has been opened.
Sensor monitoring
The removal of, or a fault in, a temperature sensor is detected. Should this happen all fans monitored by this sensor run at maximum speed, to achieve the greatest possible protection of the hardware.
Voltage monitoring
When voltage exceeds warning level high or falls below warning level low an alert will be generated.
System Event Log (SEL)
All monitored events of the system board are recorded in the System Event Log. They could be retrieved after a system reboot via ServerView.
D2630 (RX600 S3) SAS | 17 |