(11)The use of labels might cause adhesive to stick to parts of the cutter, thermal head, and/or paper holder, causing cutting errors. To help prevent this from occurring, clean these parts at least once a month, or as need, with ethyl alcohol.
(12)When changing the type of paper roll, clean the platen with ethyl alcohol before installing the new type to prevent errors such as feed errors.
(13)The printer speed must not exceed four transactions (four cutting operations) per minute. Using a faster printer speed might cause a malfunction. (One transaction is considered equivalent to feeding 25 lines.)
(14)Do not use a paper roll with frayed ends (rough paper edges). Otherwise, the paper guide of the frame might become worn, causing cutting errors.
(15)When top margin is set as 4.5mm, paper reverse operation follows before a next printing start. Therefore when printing/cut of a receipt are completed, please be sure to remove a receipt for every sheet. Otherwise, in the case of paper reverse operation, the partial cut part of
(16)When you set top margin as 4.5mm and you print a label continuously, do not use plural SHEETS printing method but plural PAGES printing method, which needs paper reverse operation at only one time.
(17)To use the
(18)This printer can use USB1.1, under Self Power Mode. The printer can not operate in Bus Power Mode. Use the appropriate AC adapter to power the printer.
(19)
19