6.5 Packaging
6.5.2Box packaging
Cushion (upper) | Desicant |
| |
Cushion (lower) | Unitary paked product |
| |
| Seal side |
| Conductivity bag (large) |
Box
Figure 6.3 Box packaging
(1)Put the conductivity bag (large) into the
(2)Put the bag packed products into the cushion (lower).
•Insert the seal side upward.
•In the fraction shipment, empty the slots in the Figure 6.4 where figure is larger than the number of shipment, and fill other slots with the products.
(3)Put the desiccants between the conductivity bag (large) and the cushion (lower) in the box. (20g x 10 area)
(4)Put the cushion (upper) into the box.
(5)Seal the conductivity bag (large) with the packaging tape.
(6)Close the box with the packaging tape. (Attach the tape in ‘H’ figure at the top.)
77 |