Important Alert Items
Important Alert Messages
The important alert messages in this manual are as follows:
A hazardous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly. Also, damage to the product or other property, may occur if the user does not perform the procedure correctly.
Task |
| Alert message | Page |
|
|
| |
Installation | Damage |
| |
| Never remove any labels from the HDD or deface them in any way. | 43 | |
| High temperature |
| |
| To prevent injury, never touch the HDD while it is hot. The DE and LSI | 53, 62, 67 | |
| become hot during operation and remain hot immediately after turning off |
| |
| the power. |
| |
| Damage |
| |
| 1. When dismounting the HDD which is mounted on the system while | 62 | |
| power is supplied to it. |
| |
| 1) | Stop the spindle motor by a START/STOP UNIT command. It takes |
|
|
| about 15 seconds for the spindle motor to stop completely. |
|
| 2) | Then, dismount the HDD using the HDD mounting/dismounting |
|
|
| mechanism, etc. of the system. When removing the HDD, avoid |
|
|
| exposing it to shock or vibration. Just in case, stop dismounting once |
|
|
| when SAS connector breaks off contact and wait unitil the spindle |
|
|
| motor stops (about 15 seconds.). |
|
| 2. When dismounting the HDD which is mounted on the system while |
| |
| power is not supplied to it. |
| |
| • | Dismount the HDD using the HDD mounting/dismounting |
|
|
| mechanism, etc. of the system. When removing the HDD, avoid |
|
|
| exposing it to shock or vibration. |
|
| 3. When storing or transporting the HDD, put it in the antistatic bag |
| |
| (refer to Section 5.1 and 6.5). |
| |
|
|
|
|
3 |